Hi, LONG list of multiple servers sent privately. But all the identified ones are -
R620 Name : BIOS Version : 2.2.3 Name : iDRAC7 Version : 1.57.57 (Build 4) srvadmin-all-7.1.0-4.2.1.el6.x86_64 (Except 1, which is srvadmin-all-8.5.0-2372.10488.el7.x86_64) Tuc On Fri, Jun 23, 2017 at 12:48 AM, <[email protected]> wrote: > Dell - Internal Use - Confidential > > Hi Tuc, > > Thank you for your time. > > Can you please help us providing the below details so that, we can quickly > analyze the issue? > > What are the iDRAC firmware, BIOS versions on your system? > Can you provide the following commands response? > ipmitool sdr > ipmitool sensor > > If this issue is seen on any particular server then please let us know the > server model details as well. > > Regards, > Chandra > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 21 Jun 2017 16:09:05 -0400 > From: Scott Ellentuch <[email protected]> > Subject: [Linux-PowerEdge] check_openmanage and omreport > To: "[email protected]" <[email protected]> > Message-ID: > <cam-0slzkus8ktss1-qo7wsdzeo+8a2zy6le_fbzz89uqwfe...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi, > > I recently was delegated the task of cleaning up some of the Sensu alerts... > As such, check_openmanage was reporting for a bunch of systems : > > # ./check_openmanage > > Voltage sensor 0 [CPU1 VCORE PG] is Unknown reading > > Controller 0 [PERC H310 Mini]: Firmware '20.13.0-0007' is out of date > > Voltage sensor 1 [CPU2 VCORE PG] is Unknown reading > > Voltage sensor 4 [CPU2 PLL PG] is Unknown reading > > Voltage sensor 5 [CPU1 PLL PG] is Unknown reading > > Voltage sensor 7 [CPU1 M23 VDDQ PG] is Unknown reading > > Voltage sensor 8 [CPU1 M23 VTT PG] is Unknown reading > > Voltage sensor 10 [CPU2 VSA PG] is Unknown reading > > Voltage sensor 11 [CPU1 VSA PG] is Unknown reading > > Voltage sensor 12 [CPU2 M01 VDDQ PG] is Unknown reading > > Voltage sensor 13 [CPU1 M01 VDDQ PG] is Unknown reading > > Voltage sensor 14 [CPU2 M23 VTT PG] is Unknown reading > > Voltage sensor 15 [CPU2 M01 VTT PG] is Unknown reading > > Voltage sensor 17 [CPU2 VTT PG] is Unknown reading > > Voltage sensor 18 [CPU1 VTT PG] is Unknown reading > > Voltage sensor 19 [CPU2 M23 VDDQ PG] is Unknown reading > > Voltage sensor 23 [System Board BP1 5V PG] is Unknown reading > > Voltage sensor 24 [CPU1 M01 VTT PG] is Unknown reading > > > I thought I had previously read that upgrading to OMSA 8 would fix this, so > went all the way to 8.5.0. Unfortunately, same thing. I even loaded the > srvadmin-idrac7 and srvadmin-idracadm7 just in case, still same issue. > > I thought this had been beaten to death and upgrade was the answer, but > doesn't seem to be working. I even upgraded the plugin to 3.7.12. > But omreport confirms : > > Index : 1 > > Status : Unknown > > Probe Name : CPU2 VCORE PG > > Reading : > > Minimum Warning Threshold : [N/A] > > Maximum Warning Threshold : [N/A] > > Minimum Failure Threshold : [N/A] > > Maximum Failure Threshold : [N/A] > > > Thoughts where to go next? > > Thanks, Tuc > > > > ------------------------------ > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > > End of Linux-PowerEdge Digest, Vol 157, Issue 18 > ************************************************ _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
