Dell - Internal Use - Confidential
Hi Tuc,
Thank you for your time.
Can you please help us providing the below details so that, we can quickly
analyze the issue?
What are the iDRAC firmware, BIOS versions on your system?
Can you provide the following commands response?
ipmitool sdr
ipmitool sensor
If this issue is seen on any particular server then please let us know the
server model details as well.
Regards,
Chandra
----------------------------------------------------------------------
Message: 1
Date: Wed, 21 Jun 2017 16:09:05 -0400
From: Scott Ellentuch <[email protected]>
Subject: [Linux-PowerEdge] check_openmanage and omreport
To: "[email protected]" <[email protected]>
Message-ID:
<cam-0slzkus8ktss1-qo7wsdzeo+8a2zy6le_fbzz89uqwfe...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Hi,
I recently was delegated the task of cleaning up some of the Sensu alerts... As
such, check_openmanage was reporting for a bunch of systems :
# ./check_openmanage
Voltage sensor 0 [CPU1 VCORE PG] is Unknown reading
Controller 0 [PERC H310 Mini]: Firmware '20.13.0-0007' is out of date
Voltage sensor 1 [CPU2 VCORE PG] is Unknown reading
Voltage sensor 4 [CPU2 PLL PG] is Unknown reading
Voltage sensor 5 [CPU1 PLL PG] is Unknown reading
Voltage sensor 7 [CPU1 M23 VDDQ PG] is Unknown reading
Voltage sensor 8 [CPU1 M23 VTT PG] is Unknown reading
Voltage sensor 10 [CPU2 VSA PG] is Unknown reading
Voltage sensor 11 [CPU1 VSA PG] is Unknown reading
Voltage sensor 12 [CPU2 M01 VDDQ PG] is Unknown reading
Voltage sensor 13 [CPU1 M01 VDDQ PG] is Unknown reading
Voltage sensor 14 [CPU2 M23 VTT PG] is Unknown reading
Voltage sensor 15 [CPU2 M01 VTT PG] is Unknown reading
Voltage sensor 17 [CPU2 VTT PG] is Unknown reading
Voltage sensor 18 [CPU1 VTT PG] is Unknown reading
Voltage sensor 19 [CPU2 M23 VDDQ PG] is Unknown reading
Voltage sensor 23 [System Board BP1 5V PG] is Unknown reading
Voltage sensor 24 [CPU1 M01 VTT PG] is Unknown reading
I thought I had previously read that upgrading to OMSA 8 would fix this, so
went all the way to 8.5.0. Unfortunately, same thing. I even loaded the
srvadmin-idrac7 and srvadmin-idracadm7 just in case, still same issue.
I thought this had been beaten to death and upgrade was the answer, but doesn't
seem to be working. I even upgraded the plugin to 3.7.12.
But omreport confirms :
Index : 1
Status : Unknown
Probe Name : CPU2 VCORE PG
Reading :
Minimum Warning Threshold : [N/A]
Maximum Warning Threshold : [N/A]
Minimum Failure Threshold : [N/A]
Maximum Failure Threshold : [N/A]
Thoughts where to go next?
Thanks, Tuc
------------------------------
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
End of Linux-PowerEdge Digest, Vol 157, Issue 18
************************************************
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
