Hi Prashant, Thanks for your reply.
oneohtwo:~# apt-get install mpt-status Reading package lists... Done Building dependency tree... Done mpt-status is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 32 not upgraded. oneohtwo:~# modprobe mptctl oneohtwo:~# lsmod | grep mpt mptsas 31120 0 mptscsih 29184 1 mptsas scsi_transport_sas 36608 1 mptsas mptctl 29960 2 mptbase 56672 3 mptsas,mptscsih,mptctl scsi_mod 153008 5 mptsas,mptscsih,scsi_transport_sas,sd_mod,megaraid_sas oneohtwo:~# mpt-status MPI_FUNCTION_CONFIG (get page header): No such device Every time I get this error but I have no idea how to fix that. Le 09-07-21 à 05:39, Prashant Ramhit a écrit : > Hi Nicola. > > You will need to get mpt status working before, > > 1. apt-get get install mpt-status > 2. load the module by modprobe mptctl > 3. check if module is loaded lsmod | grep mpt > > issue > mpt-status command > it will display the following > > r...@hammerhead:~# mpt-status > open /dev/mptctl: No such file or directory > Try: mknod /dev/mptctl c 10 220 > Make sure mptctl is loaded into the kernel > > r...@hammerhead:~# modprobe mptctl > > r...@hammerhead:~# mpt-status > ioc0 vol_id 0 type IM, 2 phy, 278 GB, state OPTIMAL, flags ENABLED > ioc0 phy 1 scsi_id 9 SEAGATE ST3300656SS HS0A, 279 GB, state > ONLINE, flags NONE > ioc0 phy 0 scsi_id 1 SEAGATE ST3300656SS HS0A, 279 GB, state > ONLINE, flags NONE > > Then follow the instructions from nagios exchange to get it > monitored from nagios > http://pookey.co.uk/blog/archives/48-Monitoring-Dell-SAS-5iR-RAID-with-nagios.html > > > Kind regards, > Prashant > > > Nicolas Delanos wrote: >> Hello, >> >> I have a Dell PowerEdge 2950 with debian etch (2.6.18-6-amd64 #1 >> SMP Fri Dec 12 05:49:32 UTC 2008 x86_64 GNU/Linux). >> >> # lspci >> 01:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078 PCI- >> X Fusion-MPT SAS (rev 04) >> >> I would like to monitor the RAID status. I tried to follow several >> tutorial but it doesn't work. Every time I get this error. >> >> # mpt-status >> MPI_FUNCTION_CONFIG (get page header): No such device >> >> Can you help me ? >> >> Thanks in advance. >> >> _______________________________________________ >> Linux-PowerEdge mailing list >> [email protected] >> https://lists.us.dell.com/mailman/listinfo/linux-poweredge >> Please read the FAQ at http://lists.us.dell.com/faq >> >> > > > -- > *Prashant Ramhit* > /Technical/ > Blue Barracuda > [email protected] <mailto:[email protected]> > d: +44 (0)20 7923 6870 > t: +44 (0)20 7923 6840 > www.bluebarracuda.com <http://www.bluebarracuda.com> > _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
