At 19:14 22/05/1999 -0300, Masterson Pairetti wrote:
>Hi....and forgive me for sending lotsa messages about this topic.
>
>My modem is an internal 33.6, with Rockwell Chipset and this is my
>'seterial' configuration for the port the modem is:
>
>/dev/ttyS2, Line 2, UART: 16550, Port: 0x03e8, IRQ: 4
> Baud_base: 115200, close_delay: 50, divisor: 0
> closing_wait: 3000, closing_wait2: infinte
> Flags: spd_normal skip_test
The solution to your problem is (as Clifford Kite has also mentioned)...
/sbin/setserial /dev/ttyS2 uart 16550A
Try it even if you think it probably won't work. As you probably know, whack
that in the appropriate init script for it to be set automatically.
If that doesn't work, that I will personally go out into the nearest sewer
and eat the biggest, ugliest rat I can find. So I hope it works....
Yours,
Kris
PS. I had a similar, but not exact problem. I think I actually started
Clifford on his UART crusade :-) At least I might have helped a few people
with it. I also don't have your original message, as I purged it some time ago
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
