Hi Hasan,
To get the modem working, set the jumpers to be non-pnp.
The manual details it for you.
If you don't have the manual contact me and I'll tell you what my manual
says.
Now, it will need to be deleted and reinstalled under windows once you make
this chage.
Just to warn you.
It will work flawlessly under Linux then.
Regards,
Rodney Fisk<[EMAIL PROTECTED]>
Hasan Mahmood wrote:
> Hello.
>
> I am running RH 6.0 with a US Robotics Faxmodem (model no. 1787-00); I
> can't get the modem to respond. It works fine under Windows 98. I have the
> modem running PnP; I think the new kernel supports PnP. I tried using
> isapnp, but that does not seem to work either. Anybody else having this
> problem? I would be very interested to know if anybody was able to setup
> this kind of modem up with RH 6.0 or RH 5.2.
>
> Thanks,
> Hasan.
>
> \\_____/===\_____//
> --0\ /0--
> (@)
>
> Hasan Mahmood
> Department of Electrical and Computer Engineering
> The University of Texas at Austin
> Austin, TX
> (512) 480 0669
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
