That's EXTREMELY useful information to have as the servers are
all being spec'ed with IBM 10k SCA drives. What was the issue
exactly?
Cheers,
Chris
> From [EMAIL PROTECTED] Wed May 2 13:02:10 2001
>
> I had some serious problems with these cards and IBM 10k scsi drives. Make
> sure that you call and check your IBM drive firmware revision (checking the
> website doens't help)... also, take a look at http://linux.adaptec.com -
> good info there.
>
> Micah
>
> On Wed, 02 May 2001, [EMAIL PROTECTED] wrote:
>
> > On Wed, 2 May 2001, ritz wrote:
> >
> > > I have a consulting customer who seems rather insistent on
> > > using these rather than the equivalent Mylex acceleraid
> > > card. Anyone using these in production? Are the drivers
> > > as mature as Leonard's buslogic/mylex code?
> >
> > We have a few of each (Adaptec and Mylex) in production.
> >
> > The Adaptecs seem to work. The only PITA with them is the driver is not
> > part of the standard kernels, so for any kernel upgrade, you have to
> > either use Adaptec's binary driver or get their source and build it
> > yourself. This also makes distribution upgrades a pain. Either wait for
> > an Adaptec driver disk for the distribution, or build your own.
> >
> > --
> > ----------------------------------------------------------------------
> > Jon Lewis *[EMAIL PROTECTED]*| I route
> > System Administrator | therefore you are
> > Atlantic Net |
> > _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> > the body of a message to [EMAIL PROTECTED]
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to [EMAIL PROTECTED]
>
--
Chris Mauritz
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
