Hello Neil , I found the problem that caused the 'cannot allcate
memory' , DON'T use '--bitmap=' .
But that said , Hmmmm , Shouldn't mdadm just stop & say ...
'md: bitmaps not supported for this level.'
Like it puts out into dmesg .
Also think this message in dmesg is interesting .
"raid0: bad disk number -1 - aborting!'
Hth , JimL
ps:
# mdadm -C /dev/md6 -l 0 -n 3 --bitmap=internal /dev/md[3-5]
mdadm: /dev/md4 appears to be part of a raid array:
level=raid0 devices=3 ctime=Sat Mar 24 18:13:38 2007
mdadm: /dev/md5 appears to be part of a raid array:
level=raid0 devices=3 ctime=Sat Mar 24 18:13:38 2007
Continue creating array? y
mdadm: RUN_ARRAY failed: Cannot allocate memory
mdadm: stopped /dev/md6
# mdadm --version
mdadm - v2.6.1 - 22nd February 2007
# uname -a
Linux filesrv1b 2.6.21-rc4 #2 SMP Thu Mar 22 04:19:35 UTC 2007 i686 pentium4
i386 GNU/Linux
More info at:
http://www.baby-dragons.com/filesrv2-raid-and-scsi-device-LettersnNumbers.txt
--
+-----------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 663 Beaumont Blvd | Give me Linux |
| [EMAIL PROTECTED] | Pacifica, CA. 94044 | only on AXP |
+-----------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
