So, what kind of error is: end_request: I/O error, dev sdb, sector 42644555 end_request: I/O error, dev sdb, sector 124365763 ...
I am still trying to figure out why that just make one of my servers unresponsive. Is there a way to have the md code kick that drive out of the array? The datacenter people are starting to get impatient having to reboot it every other day. Thanks, Alberto On Thu, 2007-05-31 at 16:10 +1000, Neil Brown wrote: > On Wednesday May 30, [EMAIL PROTECTED] wrote: > > > > After thinking about your post, I guess I can see some logic behind > > not failing on the read, although I would say that after x amount of > > read failures a drive should be kicked out no matter what. > > When md gets a read error, it collects the correct data from elsewhere > and tries to write it to the drive that apparently failed. > If that succeeds, it tries to read it back again. If that succeeds as > well, it assumes that the problem has been fixed. Otherwise it fails > the drive. > > > NeilBrown > - > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Alberto Alonso Global Gate Systems LLC. (512) 351-7233 http://www.ggsys.net Hardware, consulting, sysadmin, monitoring and remote backups - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
