Justin Piszcz wrote:
On Sat, 14 Jul 2007, Bill Davidsen wrote:
Bryan Christ wrote:
My apologies if this is not the right place to ask this question.
Hopefully it is.
I created a RAID5 array with:
mdadm --create /dev/md0 --level=5 --raid-devices=5 /dev/sda1
/dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1
mdadm -D /dev/md0 verifies the devices has a persistent super-block,
but upon reboot, /dev/md0 does not get automatically assembled (an
hence is not a installable/bootable device).
I have created several raid1 arrays and one raid5 array this way and
have never had this problem. In all fairness, this is the first
time I have used mdadm for the job. Usually, I boot to something
like SysRescueCD, used raidtools to create my array and then reboot
with my Slackware install CD.
Anyone know why this might be happening?
Old type arrays are assembled due to having the proper partition
type, 0xfd "Linux auto RAID" and are assembled by the kernel. All
others are assembled by mdadm running out of initrd or similar, and
failures there result from not having a proper config file in the
initrd image.
IIRC raidtools does set the array partitions to the auto-assemble
partition type. Hope that points you in the right direction. Running
"fdisk -l"
as root will let you see all the partitions, types, etc, for
everything on your system.
I may be wrong, I thought auto-assemble only worked with type 0 or 1.
--
bill davidsen <[EMAIL PROTECTED]>
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
I use auto-assemble (in conjunction with Debian's own startup scripts)
and for my root RAID1 device,swap and /boot, it is automatically taken
care of by the kernel. For RAID5, it seems to work the same:
Are those partitions type "Linux RAID" or is the assemble being run from
the init scripts? I suspect the latter.
[ 58.919378] RAID5 conf printout:
[ 58.919418] --- rd:10 wd:10
[ 58.919457] disk 0, o:1, dev:sdc1
[ 58.919498] disk 1, o:1, dev:sdd1
[ 58.919539] disk 2, o:1, dev:sde1
[ 58.919579] disk 3, o:1, dev:sdf1
[ 58.919619] disk 4, o:1, dev:sdg1
[ 58.919659] disk 5, o:1, dev:sdh1
[ 58.919719] disk 6, o:1, dev:sdi1
[ 58.919759] disk 7, o:1, dev:sdj1
[ 58.919799] disk 8, o:1, dev:sdk1
[ 58.919839] disk 9, o:1, dev:sdl1
Justin.
--
bill davidsen <[EMAIL PROTECTED]>
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
