Add a device node for the L2 cache, and link the CPU nodes to it. The L2 cache for the Cortex-A15 CPU cores is 1 MiB large (organized as 64 KiB x 16 ways).
Signed-off-by: Geert Uytterhoeven <[email protected]> --- v3: - Drop "arm,data-latency" and "arm,tag-latency" properties, as they may not be valid when using virtualization, - Change one-line summary prefix to match current arm-soc practices, v2: - Drop (incorrect) optional cache-{size,sets,{block,line}-size} properties, as this information is auto-detected, - Integrate linking CPUs to L2 cache into this patch, - Extracted from series "[PATCH/RFC 00/15] ARM: shmobile: R-Car: Add SYSC PM Domain DT Support". --- arch/arm/boot/dts/r8a7791.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 8910236e64bf93ed..a65910ed5884edfd 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -51,6 +51,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ + next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -66,9 +67,16 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + next-level-cache = <&L2_CA15>; }; }; + L2_CA15: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- 1.9.1
