On Mon, Feb 12, 2018 at 2:55 PM, Geert Uytterhoeven
<geert+rene...@glider.be> wrote:

> Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable
> when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO
> block's module clock (if exists) is manually kept running during system
> suspend, to make sure the device stays active.
> However, this explicit clock handling is merely a workaround for a
> failure to properly communicate wakeup information to the device core.
> Instead, set the device's power.wakeup_path field, to indicate this
> device is part of the wakeup path.  Depending on the PM Domain's
> active_wakeup configuration, the genpd core code will keep the device
> enabled (and the clock running) during system suspend when needed.
> This allows for the removal of all explicit clock handling code from the
> driver.
> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>

Acked-by: Linus Walleij <linus.wall...@linaro.org>

Can I apply this and only this patch to GPIO?

Should it be applied for fixes, next?

Else please funnel this through the irqchip tree with my

Linus Walleij

Reply via email to