On Fri, Mar 2, 2018 at 9:20 AM, Geert Uytterhoeven <ge...@linux-m68k.org> wrote:
> On Thu, Mar 1, 2018 at 5:06 PM, Linus Walleij <linus.wall...@linaro.org>
>> On Mon, Feb 12, 2018 at 2:55 PM, Geert Uytterhoeven
>> <geert+rene...@glider.be> wrote:
>>> Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable
>>> when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO
>>> block's module clock (if exists) is manually kept running during system
>>> suspend, to make sure the device stays active.
>>> However, this explicit clock handling is merely a workaround for a
>>> failure to properly communicate wakeup information to the device core.
>>> Instead, set the device's power.wakeup_path field, to indicate this
>>> device is part of the wakeup path. Depending on the PM Domain's
>>> active_wakeup configuration, the genpd core code will keep the device
>>> enabled (and the clock running) during system suspend when needed.
>>> This allows for the removal of all explicit clock handling code from the
>>> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
>> Patch applied for v4.16 fixes.
> Are you aware this conflicts with commit 51750fb167a05468 ("gpio: gpio-rcar:
> Support S2RAM") in gpio/for-next?
No but I guess I will become aware.
I have not yet mixed the fixes and devel branches for next.
> You can find the resolution in