Hi Linus,
On Thu, Feb 22, 2018 at 3:23 PM, Linus Walleij <linus.wall...@linaro.org> wrote:
> On Mon, Feb 12, 2018 at 2:55 PM, Geert Uytterhoeven
> <geert+rene...@glider.be> wrote:
>
>> Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable
>> when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO
>> block's module clock (if exists) is manually kept running during system
>> suspend, to make sure the device stays active.
>>
>> However, this explicit clock handling is merely a workaround for a
>> failure to properly communicate wakeup information to the device core.
>>
>> Instead, set the device's power.wakeup_path field, to indicate this
>> device is part of the wakeup path. Depending on the PM Domain's
>> active_wakeup configuration, the genpd core code will keep the device
>> enabled (and the clock running) during system suspend when needed.
>> This allows for the removal of all explicit clock handling code from the
>> driver.
>>
>> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
>
> Acked-by: Linus Walleij <linus.wall...@linaro.org>
>
> Can I apply this and only this patch to GPIO?
Yes please.
> Should it be applied for fixes, next?
No, as it depends on infrastructure (device_set_wakeup_path()) and fixes
(various "Keep wakeup sources active during system suspend") in v4.16-rc1.
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
