Hello!

On 04/16/2018 04:02 PM, Geert Uytterhoeven wrote:

>> Add the pin I/O voltage level control to the R8A77980 PFC driver.
> 
> Subject says r8a77970?

   Typo, I guess. :-)

>> Loosely based on the original (and large) patch by Vladimir Barinov.
>>
>> Signed-off-by: Vladimir Barinov <vladimir.bari...@cogentembedded.com>
>> Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
>>
>> ---
>>  drivers/pinctrl/sh-pfc/pfc-r8a77980.c |   50 
>> +++++++++++++++++++++++++++++++---
>>  1 file changed, 47 insertions(+), 3 deletions(-)
>>
>> Index: renesas-drivers/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
>> ===================================================================
>> --- renesas-drivers.orig/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
>> +++ renesas-drivers/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
> 
> Ah, pfc-r8a77980.c it is.
> 
>> @@ -2779,8 +2779,51 @@ static const struct pinmux_cfg_reg pinmu
>>         { },
>>  };
>>
>> +enum ioctrl_regs {
>> +       IOCTRL30,
>> +       IOCTRL31,
>> +       IOCTRL32,
>> +};
>> +
>> +static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = {
>> +       [IOCTRL30] = { 0xe6060380, },
>> +       [IOCTRL31] = { 0xe6060384, },
>> +       [IOCTRL32] = { 0xe6060388, },
>> +       { /* sentinel */ },
> 
> However, r8a77980 has 4 IOCTRL3x registers (r8a77970 has three)?

   I thought that since we don't change it, no need to list it for save/restore
either. I was wrong?

> Something is wrong: which SoC source file is this patch for?

   R8A77980.

> Gr{oetje,eeting}s,
> 
>                         Geert

MBR, Sergei

Reply via email to