Hi Sergei,
On Fri, Apr 13, 2018 at 8:29 PM, Sergei Shtylyov
<[email protected]> wrote:
> Add the pin I/O voltage level control to the R8A77980 PFC driver.
>
> Loosely based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <[email protected]>
> Signed-off-by: Sergei Shtylyov <[email protected]>
Thanks for your patch!
> --- renesas-drivers.orig/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
> +++ renesas-drivers/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
> @@ -2779,8 +2779,51 @@ static const struct pinmux_cfg_reg pinmu
> { },
> };
>
> +enum ioctrl_regs {
> + IOCTRL30,
> + IOCTRL31,
> + IOCTRL32,
> +};
> +
> +static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = {
> + [IOCTRL30] = { 0xe6060380, },
> + [IOCTRL31] = { 0xe6060384, },
> + [IOCTRL32] = { 0xe6060388, },
I'd add IOCTRL33, so it is saved/restored during system suspend/resume.
You never know what U-Boot wrote to it, which is skipped on system resume.
Note for the future: unlike all other current pocctrl handling, IOCTRL33
is used to select between 2.5V and 3.3V (instead of 1.8V and 3.3V.
Handling that will require changes to the r8a77980_pin_to_pocctrl()
interface (add two output parameters returning supported voltages?).
With IOCTRL33 added:
Reviewed-by: Geert Uytterhoeven <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
