From: Geert Uytterhoeven <[email protected]>
Enable support for the ARM Performance Monitor Units in the Cortex-A15
and Cortex-A7 CPU cores on R-Car H2 by adding device nodes for the two
PMUs.
New Linux output:
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters
available
hw perfevents: /pmu-1: failed to probe PMU!
hw perfevents: /pmu-1: failed to register PMU devices!
The last two lines are due to the Cortex-A7 CPU cores being described in
DT, but not enabled by the firmware.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
---
arch/arm/boot/dts/r8a7790.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0a426548a212..ae97ec146260 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -202,6 +202,24 @@
clock-frequency = <0>;
};
+ pmu-0 {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ pmu-1 {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
--
2.11.0
