Describe THS/CIVM in the R8A77980 device trees.
Signed-off-by: Sergei Shtylyov <[email protected]>
---
This patch is against the 'renesas-devel-20181008-v4.19-rc7' tag of Simon
Horman's 'renesas.git' repo.
Changes in version 2:
- renamed the thermal device node label;
- renamed the thermal zone nodes;
- added the passive trip point in the 1st thermal zone and the passive and
critical trip points in the 2nd thermal zone;
- changed the "hysteresis" prop in the critical trip point;
- removed the empty "cooling-maps" node from the 1st thermal zone.
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 53 ++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -330,6 +330,19 @@
#power-domain-cells = <1>;
};
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a77980-thermal";
+ reg = <0 0xe6198000 0 0x100>,
+ <0 0xe61a0000 0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ };
+
intc_ex: interrupt-controller@e61c0000 {
compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
#interrupt-cells = <2>;
@@ -1404,6 +1417,46 @@
};
};
+ thermal-zones {
+ thermal-sensor-1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1-passive {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ sensor1-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ thermal-sensor-2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2-passive {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ sensor2-critical {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
