Hi, [trimming down to relevant context]
> +endpoint node > +------------- > + > +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in > + video-interfaces.txt. This property can be only used to specify number > + of data lanes, i.e. the array's content is unused, only its length is > + meaningful. When this property is not specified default value of 1 lane > + will be used. Apologies for having not replied to the last posting, but having looked at the documentation I was provided last time [1], I don't think the values in the data-lanes property should be described as unused. That may be the way the Linux driver functions at present, but it's not how the generic video-interfaces binding documentation describes the property. If the CSI transmitter hardware doesn't support logical remapping of lanes, then the only valid values for data-lanes would be a contiguous list of lane IDs starting at 1, ending at 4 at most. Valid values for the property would be one of: data-lanes = <1>; data-lanes = <1>, <2>; data-lanes = <1>, <2>, <3>; data-lanes = <1>, <2>, <3>, <4>; We can mention the fact the hardware doesn't support remapping of lanes, and therefore the list must start with lane 1 and end with (at most) lane 4. That way a dts will match the generic binding and actually describe the hardware, and it's possible for Linux (or any other OS) to factor out the parsing of data-lanes later as desired. I don't think we should offer freedom to encode garbage in the dt when we can just as easily encourage more standard use of bindings that will make our lives easier in the long-term. Thanks, Mark. [1] http://www.mipi.org/specifications/camera-interface#CSI2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
