From: "Pekka Pietik{inen" <[EMAIL PROTECTED]>
Date: Fri, 15 Jan 1999 18:33:07 +0200
I've been trying to get linux installed on a N440BX + intel astor
chassis system without any luck. When linux scans the bus I get the following
error (id 6 is the hotswap controller, which is detected as "ESG-SHV SCA
HSBP M5 0.47" by the NCR bios). I've tried most combinations of sync/wide
options in the bios without success and used both ncr53c8xx and sym53c8xx
drivers.
You can disable the SAF-TE backplane on the Astor by setting the bottom jumper
to the "Force Update" position.
Leonard
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
