With kernels 2.1.132 and 2.2.1, i can no longer access my HP35480A dds
drive:
> gt-priv [7] tar tvf /dev/rmt0
> tar: Read error on /dev/rmt0: Input/output error
> tar: At beginning of tape, quitting now
> tar: Error is not recoverable: exiting now
Up to 2.1.131, i could at least read the tapes. When compiling with
ncr53c8xx.[ch] v 2.5f (from kernel 2.1.107) even writing to tape
worked. For 2.1.132+ there is no change.
Although i set
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
there is no entry in the log files.
Is there any help (further reading, creation of usable log entries, ...)?
TIA,
Gerhard Traeger.
some information about the system:
> gt-priv [8] cat /proc/scsi/ncr53c8xx/0
> General information:
> Chip NCR53C875, device id 0xf, revision id 0x3
> IO port address 0x6100, IRQ number 16
> Using memory mapped IO at virtual address 0xd0802000
> Synchronous period factor 12, max commands per lun 32
>
> gt-priv [9] cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: IBM OEM Model: DFHSS4F Rev: 4040
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: IBM OEM Model: DCHS09W Rev: 5353
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 02 Lun: 00
> Vendor: FUJITSU Model: M2511A Rev: 0600
> Type: Direct-Access ANSI SCSI revision: 01
> Host: scsi0 Channel: 00 Id: 03 Lun: 00
> Vendor: HP Model: HP35480A Rev: 1009
> Type: Sequential-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
> Vendor: TOSHIBA Model: CD-ROM XM-3401TA Rev: 0283
> Type: CD-ROM ANSI SCSI revision: 02
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
