On Mon, 6 Sep 1999, Menaka Lashitha Bandara wrote:
> modprobe g_NCR5380 ncr_irq=255 ncr_addr=0x2c0 ncr_5380=1
You might try appending dtc_3181e=1 to the driver.
I have to say that I gave up, and bought an Adaptec 2904 to
run my scanner from. I'm currently waiting for a scsi cable to
be delivered to test it.
> Both tese failed. It says:
>
> scsi0: bus busy, attempting abort
>
> and freezes my whole system. Can anyone make any suggestions as to how I
> can get this working?
I didn't even get this. On multi-processor 2.2.x I see a hard lock
with nothing at all in the syslog.
Regards,
Mark
+-------------------------------------------------------------------------+
Mark Cooke The views expressed above are mine and are not
Systems Programmer necessarily representative of university policy
University Of Birmingham URL: http://www.sr.bham.ac.uk/~mpc/
+-------------------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
