Linux-Setup Digest #189, Volume #19 Tue, 18 Jul 00 16:13:12 EDT
Contents:
Re: linux/errno.h: No such file or directory (kernel compile error) ("Rinaldi J.
Montessi")
YP and + (sylvain hutchison)
Re: can't load xwindows after edditing xf86config (cabal2112)
Re: "Modem Busy" Problem (David W Demmin)
Partition advice ("Gary")
dual boot help ([EMAIL PROTECTED])
Prompt for root account: Bash Shell problems ("Chris Pollock")
R: HELP! Login Problem ("Damiano LIBERO")
Re: capture screen output during booting (Perry Pip)
Re: ATI Rage 128 (Lorenzo)
Re: dual boot help ("Gary")
Re: Prompt for root account: Bash Shell problems ("Andrew E. Schulman")
Re: Partition advice ("Andrew E. Schulman")
Re: How to change runlevel at boot time ? (Perry Pip)
Re: fdisk /mrb ("Andrew E. Schulman")
Re: X will not start with .xsession in $HOME dir (Perry Pip)
Re: Prompt for root account: Bash Shell problems ("Coy")
Re: lucent winmodem in laptop (D G)
----------------------------------------------------------------------------
From: "Rinaldi J. Montessi" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Crossposted-To: linux.redhat.misc
Subject: Re: linux/errno.h: No such file or directory (kernel compile error)
Date: Tue, 18 Jul 2000 14:10:45 -0400
I have found it helpful to rm -rf /lib/modules/x.x.xx-x when
recompiling a kernel. The modules will be replaced during the make
dep; make modules; make modules_install portion of the compilation.
What you are experiencing is modules that were installed under a
different configuration and are no longer required. You could, of
course pipe depmod -a to a file, examine the file for unneeded
modules, and remove them by hand. The problem there is knowing
exactly what modules are required by another.
Option one is probably better.
Mv your /.config to ../, make mrproper, mv ../.config back and do
it again. I prefer make xconfig because the help files are more
readily available. I also like coffee ice cream. Of course the
kernel will compile faster with x closed. There's also an option to
allocate memory resources (megram/8+1, I believe) that can speed
things up. You may find more info here:
http://www.linux.com/tuneup/database.phtml/Kernel/000115.html
Clyde Spencer wrote:
>
> I ran 'make mrproper' and started over completely, including re-running
> 'make menuconfig.' Everything compiled and I was finally able to boot off
> the floppy image. However, during the booting process, there was a long
> list of errors reported by 'depmod' each line said "unrecognized symbol."
> It seems that many of them were related to things that I marked "no" when
> running 'menuconfig.' Any thoughts on what is causing this and how to fix
> it?
> Clyde
>
> Rinaldi J. Montessi wrote in message <[EMAIL PROTECTED]>...
> >Clyde Spencer wrote:
> <snip>
> >Did you make clean or make mrproper before recompiling? If you nave
> >a .config mv it to ../ before doing that.
> >--
> >Rinaldi]$
> >http://www.lewrockwell.com/yates/yates9.html
--
Rinaldi]$
Lingerie-maker Frederick's of Hollywood filed for Chapter 11
bankruptcy protection in Los Angeles. Analysts revealed that market
is a bust after the bottom fell out....
------------------------------
From: sylvain hutchison <[EMAIL PROTECTED]>
Subject: YP and +
Date: Tue, 18 Jul 2000 14:31:05 -0700
Hi,
I've got a little more info now, I'm using Red Hat 6.1 right now, and I
was asked to configure the yp, ypinit, ypbind etc, whatever that is.
Once I've done that I should be able to look at all the maps, like the
passwd file, the hosts, file etc.
Another thing I need to do is set up the automounter, which will do the
dynamic
mounting of directories from other machine.
If anybody has any info or knows a site where I can get that info I will
very thankful,
Thanks a lot,
Sly.
------------------------------
From: cabal2112 <[EMAIL PROTECTED]>
Subject: Re: can't load xwindows after edditing xf86config
Date: Tue, 18 Jul 2000 18:23:04 GMT
In article <8l1s3t$qhh$[EMAIL PROTECTED]>,
/dev/niall <[EMAIL PROTECTED]> wrote:
> In article <[EMAIL PROTECTED]>,
> "Andy Fowler" <[EMAIL PROTECTED]> wrote:
> > I recently installed a wheel mouse and edited my xf86config. When I
> > rebooted xwindows would not start, the screen just keeps blinking.
> When I
> > ctrl-alt-delete and shut down it reads that the mouse server could
not
> > start. I have it set up to automatically boot xwindows, can someone
> tell me
> > how to prevent xwindows from loading so I can edit xf86config?
> >
>
> Change your system's runlevel to 3 (it's 5 now). It's in /etc/inittab
> usually.
>
> You can get to a terminal by hitting CTRL-ALT-F2. If you go to F1
you'll
> see crap from X. X itself runs on VC7.
>
> --
> /dev/niall, [EMAIL PROTECTED]
> News, articles and resources for web professionals and developers:
> http://www.kst.com
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.
>
hey
even better is to enter linux 3 at the prompt like so...
LILO boot: linux 3
this will boot to console and from there you can config as necessary.
changing your runlevel by editing the inittab needs an editor (i.e.
either in console or in x which you might not be able to get without
some playing around since your system seems to get stuck in a loop) and
using the <alt><ctrl> combo for switching terminals can cause the
system to hang(so ive heard).
safest and easiest way is to use linux 3 at the boot prompt..then
use xconfigurator or something similar. as you probably guessed runlevel
3 and 5 are the pretty much the same except 3 is console and 5 is x.
like ive said, ive used those key combos and i've done it with no
problems but ive heard it can hang up your system.
hope this helps and excuze my windoze..im at work
cabal
--
--you are no longer boone---you are cabal---save me from my enemies--
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: David W Demmin <[EMAIL PROTECTED]>
Subject: Re: "Modem Busy" Problem
Date: Tue, 18 Jul 2000 11:16:43 -0700
I had a modem die in this manner. After closing an internet connection
the modem would stay busy, at first leaving the computer off overnight and
or taking the card out and putting it back in a couple times would massage
it into working for a while again. I finally gave up and bought a new
modem. I hope that is not your problem,(settings are cheaper to replace)
and if anyone has any ideas on what might have been wrong with my modem
feel free to comment.
On Sat, 15 Jul 2000, L.M. Dizon wrote:
> Verify also if you disabled the Plug-n-Play settings in BIOS.
>
>
> John Todd <[EMAIL PROTECTED]> wrote in message
> news:[EMAIL PROTECTED]...
> > Modem busy can be an IRQ conflict. Check dmesg to see what linux
> > sees it as. If your modem is on ttyS2 (irq4), use setserial to change it.
> >
> >
> > On 08 Jul 2000 03:44:43 GMT, Whigdon2 <[EMAIL PROTECTED]> wrote:
> > >
> > >Dear Gentle-Listener,
> > >
> > >I recently installed RedHat 6.2 as a KDE workstation. No matter what I
> try
> > >(and I admit, my choices are necessarily limited), I cannot get the
> modem to
> > >dial (even). The applications (pppd, minicom, term, etc.. ) think that
> it "is
> > >busy". It is a USR Sportster modem, and it worked with RedHat Version
> 5.2, so
> > >it is not a winmodem.
> > >
> > >There are no "locks" in /var/lock/ or anywhere else that I can see.
> There are
> > >no pppd processes running (to my untrained eye). The modem is apparently
> being
> > >found, it is just "busy".
> > >
> > >I'm still new to this (though I have spend the last day and a half, at
> least,
> > >on this problem!). Any help/suggestions would be appreciated.
> > >
> > >Thanks,
> > >
> > >Bill
> >
> >
> > --
> > _____________________
> > The lap of Linuxury
> > |<de in RH6
>
>
>
>
--
David Demmin
[EMAIL PROTECTED]
------------------------------
From: "Gary" <[EMAIL PROTECTED]>
Subject: Partition advice
Date: Tue, 18 Jul 2000 19:34:33 +0100
Hi All,
I just recently installed Linux and Windows 95 (1996 version) on a new 13gb
disk.
I'm planning to re-partition the drive before I do all the work of setting
up Linux(SuSE). Please could I have some feedback and opinions about my
planned partitioning.
My current partition table is :
hda1 - 1 - 255 - 2048256 - 6 - dos primary
hda2 - 256 - 1653 - 11229435 - 5 - extended
hda5 - 256 - 256 - 8001 - 83 - linux native(boot)
hda6 - 257 - 1643 - 11141046 - 83 - linux native(root)
hda7 - 1644 - 1653 - 80293 - 82 - linux swap
My planned partition table is :
hda1 - 1 - 153 - 1228941 - 6 - dos primary
hda2 - 154 - 1653 - 12048750 - 5 - extended
hda5 - 154 - 408 - 2048256 - 6 - dos
hda6 - 409 - 663 - 2048256 - 6 - dos
hda7 - 664 - 676 - 104391 - 82 - linux swap
hda8 - 677 - 680 - 32098 - 83 - linux native(boot)
hda9 - 681 - 1653 - 7815591 - 83 - linux native(root)
I have 40mb ram. Thanks in advance.
Regards,
Gary
------------------------------
From: [EMAIL PROTECTED]
Subject: dual boot help
Date: 18 Jul 2000 14:26:48 -0500
I'm trying to set up a dual boot linux/98 system on an Athalon 700 with a
13GB drive. I partitioned the drive under linux (off the debian install
cd) into
hda1 15MB linux boot (/boot)
hda2 ~6GB Win98 fat 16
hda3 ~6.5 GB linux
hda4 ~100MB linux swap
I installed windows first on hda2 and then linux on hda1 and 3. Lilo
worked well, everything seemed fine, and then I noticed in Windows that
c: only had 998MB.
I then made the mistake of trying to reinstall windows. I let dos fdisk
delete and replace the hda2 partition, and reinstalled windows. Still 998MB
and now I can't boot linux either - my rescue disk can't find the kernel.
Any suggestions as to how I can fix this? I'm still hoping to not have
to repartition the whole drive, but if I do, I want to do it right this
time.
Thanks,
bridget
[EMAIL PROTECTED]
------------------------------
Reply-To: "Chris Pollock" <[EMAIL PROTECTED]>
From: "Chris Pollock" <[EMAIL PROTECTED]>
Crossposted-To:
alt.linux,alt.os.linux,comp.os.linux,comp.os.linux.admin,comp.os.linux.help,comp.os.linux.misc,comp.os.linux.networking,linux.redhat.misc
Subject: Prompt for root account: Bash Shell problems
Date: Tue, 18 Jul 2000 14:48:21 -0400
I'm using Redhat 6.1 and I'm having problems getting my prompt to display
correctly for my root account in the bash shell. It works fine under all
other accounts.
What's happening is when I either use su from another account or I logon
directly at the machine as root, my prompt shows up as \u@\h \W\$> (under
any other account this shows up as username@hostname workingdirectory $>)
In my /etc/bashrc file, I have a PS1 line that reads PS1="\u@\h \W\$>" and
nothing else (yet)
In my /etc/profile file, I have a line that reads:
"export PS1 USER LOGNAME MAIL HOSTNAME HISTSIZE HISTFILESIZE INPUTRC"
I have nothing relating to PS1 in my ~/.bashrc or my ~/.bash_profile for
myroot account
Can someone please explain to me how I can fix this? It's driving me nuts!
It seems like the bash shell is not processing the PS1 line for rootaccount,
and is just outputting it to the screen as a string. Any help
isappreciated!
--
Chris Pollock
[EMAIL PROTECTED]
*Remove NOSPAM to respond to me via e-mail....*
------------------------------
From: "Damiano LIBERO" <[EMAIL PROTECTED]>
Crossposted-To: alt.linux,alt.os.linux.mandrake
Subject: R: HELP! Login Problem
Date: Tue, 18 Jul 2000 18:52:13 GMT
I have had the same problem with Corel Linux.
In my case the problem was the keyboard.
I changed the keyboard and all things worked properly.
Hello
Damiano
Al <[EMAIL PROTECTED]> wrote in message
oV%c5.13686$[EMAIL PROTECTED]
> I'm hoping someone can help. So far I've not been able to come up with
any
> answers. After installing Mankdrake Linux 7.0, the kernel starts, and I
get
> the normal text-mode login. Problem is, the screen flashes almost as if
> Linux is switching from session to session, and I am unable to log in. I
> have tried various configurations, with no luck.
>
> Has anyone seem this, and does anyone know the solution?
>
> Please respond direct, as I am not a normal reader of this newgroup.
> Thanks!
>
> Regards
> Al
> [EMAIL PROTECTED]
>
>
>
>
------------------------------
From: [EMAIL PROTECTED] (Perry Pip)
Crossposted-To: comp.os.linux.x,comp.os.linux.misc,comp.os.linux.redhat
Subject: Re: capture screen output during booting
Date: 18 Jul 2000 18:52:52 GMT
Reply-To: [EMAIL PROTECTED]
Just type 'dmesg' after you have booted and logged in.
On Tue, 18 Jul 2000 09:57:14 GMT,
mikey <[EMAIL PROTECTED]> wrote:
>Hi,
>
>Is there a way to capture screen output from the kernel during
>booting ??
>
>Regards,
>Mike
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.
------------------------------
From: Lorenzo <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.hardware,comp.os.linux.x
Subject: Re: ATI Rage 128
Date: Tue, 18 Jul 2000 09:16:14 +0200
Reply-To: [EMAIL PROTECTED]
Try tihs http://www4.nscu.edu/~distclai/2daccel.html
wyatt wrote:
> I have the same card and had the same problem until I upgraded to XFree86
> 4.0.0. I still got some minor garbage until I set Option
> "XaaNoOffscreenPixmaps" and Option "Expose" in XF86Config.
>
> Wyatt
>
> In article <[EMAIL PROTECTED]>, Warren Gross wrote:
> >Almost fixed. Try scrolling in netscape.
> >Then there is noise.
> >
> >I've seen this same bug with the windows drivers
> >that shipped with the card. The problem has gone away
> >with the latest windows drivers.
> >
> >So Its coming along, but the rage 128 support in XF86 is not perfect yet.
> >
> > Warren
> >
> >[EMAIL PROTECTED] wrote:
> >
> >> > > > > > > I'm having a strange problem with my ATI Rage 128 (XPERT
> >> 2000)
> >> > > > > > >
> >> > > > > > > I installed Redhat 6.2 (xfree86 3.3.6) and it found and
> >> configured
> >> > > > > > > the card properly. I get video that appears ok, but whenever
> >> I move
> >> > > > > > > a window I see a lot of strange video noise appearing as
> >> vertical bands
> >> > > > > > > running from the top to the bottom of the screen. They are
> >> relatively
> >> > > > > > > evenly spaced.
> >> > > > > > >
> >> > > > > > > Anybody else seen this problem? Is the card ok?
> >> > > > > > >
> >>
> >> I've had the same problem with SuSE 6.4 and XFree86 3.3.6. In 8bit
> >> mode it was better, but not completely fixed.
> >>
> >> So I tried XFree86 4.0 with the same effect.
> >>
> >> But, with the XFree86 4.0.1 which I have compiled by myself two
> >> days ago, all the noise is gone. No distortion when moving the mouse
> >> or a window.
> >>
> >> Sent via Deja.com http://www.deja.com/
> >> Before you buy.
> >
------------------------------
From: "Gary" <[EMAIL PROTECTED]>
Subject: Re: dual boot help
Date: Tue, 18 Jul 2000 20:05:51 +0100
Hi Bridget,
I've just been having lots of fun partitioning my disk, I don't have windows
98 so cannot tell you what to do , but the manual I got with |SuSE says that
other operating systems such as Linux should go at the beginning. Perhaps
there are other things.
Gary
<[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
>
> I'm trying to set up a dual boot linux/98 system on an Athalon 700 with a
> 13GB drive. I partitioned the drive under linux (off the debian install
> cd) into
>
> hda1 15MB linux boot (/boot)
> hda2 ~6GB Win98 fat 16
> hda3 ~6.5 GB linux
> hda4 ~100MB linux swap
>
> I installed windows first on hda2 and then linux on hda1 and 3. Lilo
> worked well, everything seemed fine, and then I noticed in Windows that
> c: only had 998MB.
>
> I then made the mistake of trying to reinstall windows. I let dos fdisk
> delete and replace the hda2 partition, and reinstalled windows. Still
998MB
> and now I can't boot linux either - my rescue disk can't find the kernel.
>
> Any suggestions as to how I can fix this? I'm still hoping to not have
> to repartition the whole drive, but if I do, I want to do it right this
> time.
>
> Thanks,
> bridget
> [EMAIL PROTECTED]
------------------------------
From: "Andrew E. Schulman" <[EMAIL PROTECTED]>
Crossposted-To:
alt.linux,alt.os.linux,comp.os.linux,comp.os.linux.admin,comp.os.linux.help,comp.os.linux.misc,comp.os.linux.networking,linux.redhat.misc
Subject: Re: Prompt for root account: Bash Shell problems
Date: Tue, 18 Jul 2000 15:12:41 -0400
> I'm using Redhat 6.1 and I'm having problems getting my prompt to display
> correctly for my root account in the bash shell. It works fine under all
> other accounts.
>
> What's happening is when I either use su from another account or I logon
> directly at the machine as root, my prompt shows up as \u@\h \W\$> (under
> any other account this shows up as username@hostname workingdirectory $>)
Are you sure that root's shell is bash? Sometimes root uses restricted
shells such as ash for greater security. These shells have fewer
features and may not recognize the tokens in your PS1.
------------------------------
From: "Andrew E. Schulman" <[EMAIL PROTECTED]>
Subject: Re: Partition advice
Date: Tue, 18 Jul 2000 15:15:40 -0400
> Hi All,
> I just recently installed Linux and Windows 95 (1996 version) on a new 13gb
> disk.
>
> I'm planning to re-partition the drive before I do all the work of setting
> up Linux(SuSE). Please could I have some feedback and opinions about my
> planned partitioning.
>
> My current partition table is :
> hda1 - 1 - 255 - 2048256 - 6 - dos primary
> hda2 - 256 - 1653 - 11229435 - 5 - extended
> hda5 - 256 - 256 - 8001 - 83 - linux native(boot)
> hda6 - 257 - 1643 - 11141046 - 83 - linux native(root)
> hda7 - 1644 - 1653 - 80293 - 82 - linux swap
>
> My planned partition table is :
> hda1 - 1 - 153 - 1228941 - 6 - dos primary
> hda2 - 154 - 1653 - 12048750 - 5 - extended
> hda5 - 154 - 408 - 2048256 - 6 - dos
> hda6 - 409 - 663 - 2048256 - 6 - dos
> hda7 - 664 - 676 - 104391 - 82 - linux swap
> hda8 - 677 - 680 - 32098 - 83 - linux native(boot)
> hda9 - 681 - 1653 - 7815591 - 83 - linux native(root)
Your second scheme looks fine to me. You have only one primary and one
extended partition, so Windows will be happy. Linux boot partition is
within the first 1024 cylinders, so lilo will be happy. The rest just
depends on how you want to divide your space.
------------------------------
From: [EMAIL PROTECTED] (Perry Pip)
Crossposted-To: comp.os.linux.x,comp.os.linux.misc,comp.os.linux.redhat
Subject: Re: How to change runlevel at boot time ?
Date: 18 Jul 2000 19:15:10 GMT
Reply-To: [EMAIL PROTECTED]
See /etc/inittab
and `man inittab`
On Tue, 18 Jul 2000 08:00:29 GMT,
mikey <[EMAIL PROTECTED]> wrote:
>Hi,
>
>I would like to change run level at boot time. Normally it defaults to 5. But
>sometimes I don't want xdm. (say there is a prob with my xconfig etc.) I read
>all relevant HOWTOS, and found nothing. I thought I should be able to pass it
>to the kernel from lilo ?
>
>Regards,
>Mike
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.
------------------------------
From: "Andrew E. Schulman" <[EMAIL PROTECTED]>
Subject: Re: fdisk /mrb
Date: Tue, 18 Jul 2000 15:16:36 -0400
> >So I tried fdisk /mrb (via a dos bootdisk) and dos gave me :
> >invalid switch - /mrb
> ==== wrong switch
>
> try
> fdisk /MBR
MBR = Master Boot Record
------------------------------
From: [EMAIL PROTECTED] (Perry Pip)
Crossposted-To: comp.os.linux.x,comp.os.linux.misc,comp.os.linux.redhat
Subject: Re: X will not start with .xsession in $HOME dir
Date: 18 Jul 2000 19:17:10 GMT
Reply-To: [EMAIL PROTECTED]
chmod 755 .xsession ????
On Tue, 18 Jul 2000 07:52:30 GMT,
mikey <[EMAIL PROTECTED]> wrote:
>Hi,
>
>I have a Red Hat 6.2 with XFree86 3.3.6 installed on my machine. I have
>noticed that if I have .xsession (I have .xinitrc and .Xclients symlinked to
>.xsession) present in my $HOME dir (it doesn't matter if root or just any
>user) I cannot start X. In XDM it will just restart X many times until it
>gives up and console login comes up. When I do startx it will quit X
>imediately and no hint is given at all ie. just message Waiting for X to
>shutdown blah, blah. It doesn't matter what is in the .xsession file at all.
>I created empty file, 0 length and the result is the same. If I remove the
>file, all is back to normal. Anyone has got any ideas ?? Really appreciate
>some help.
>
>Cheers,
>Mike
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.
------------------------------
From: "Coy" <[EMAIL PROTECTED]>
Crossposted-To:
alt.linux,alt.os.linux,comp.os.linux,comp.os.linux.admin,comp.os.linux.help,comp.os.linux.misc,comp.os.linux.networking,linux.redhat.misc
Subject: Re: Prompt for root account: Bash Shell problems
Date: Tue, 18 Jul 2000 19:22:59 GMT
"Chris Pollock" <[EMAIL PROTECTED]> wrote in message
news:rE1d5.958$L84.932@client...
: I'm using Redhat 6.1 and I'm having problems getting my prompt to display
: correctly for my root account in the bash shell. It works fine under all
: other accounts.
:
: What's happening is when I either use su from another account or I logon
: directly at the machine as root, my prompt shows up as \u@\h \W\$> (under
: any other account this shows up as username@hostname workingdirectory $>)
:
: In my /etc/bashrc file, I have a PS1 line that reads PS1="\u@\h \W\$>" and
: nothing else (yet)
:
: In my /etc/profile file, I have a line that reads:
: "export PS1 USER LOGNAME MAIL HOSTNAME HISTSIZE HISTFILESIZE INPUTRC"
:
: I have nothing relating to PS1 in my ~/.bashrc or my ~/.bash_profile for
: myroot account
Did you check ~/.profile and ~/.login ?
These are also used by /bin/bash for overriding defaults.
dot your i's and cross your t's in all shell/login conf files.
------------------------------
From: D G <[EMAIL PROTECTED]>
Subject: Re: lucent winmodem in laptop
Date: Tue, 18 Jul 2000 12:19:11 -0700
D G wrote:
>
> Zebee Johnstone wrote:
> >
> > In comp.os.linux.setup on Fri, 14 Jul 2000 17:16:02 -0700
> > D G <[EMAIL PROTECTED]> wrote:
> > >
> > >I don't see it in there. When I get home, I'll try and post my output.
> > >In the meantime, maybe physically switching the modem to another PCI
> > >slot will help.
> > >
> >
> > *grin* check the subject line.
> >
> > Laptops aren't that easy to switch things about in!
>
> Oops! Well, I tried to post from home over the weekend, but the news
> server was down...
Here's the relevant part:
=============
Bus 1, device 11, function 0:
Communication controller: Lucent (ex-AT&T) Microelectronics Unknown
device
(rev 1).
Vendor id=11c1. Device id=441.
Medium devsel. Fast back-to-back capable. IRQ 5. Master
Capable. No
bursts. Min Gnt=252.Max Lat=14.
Non-prefetchable 32 bit memory at 0xf4100000 [0xf4100000].
I/O at 0x3400 [0x3401].
I/O at 0x3000 [0x3001].
=============
I've used it successfully on kernels 2.2.12, 2.2.13, and 2.2.14.
--
DG
e-mail is: [EMAIL PROTECTED]
(remove the Z's--they're what I do when I read SPAM!)
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.setup) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
