Linux-Setup Digest #819, Volume #19 Fri, 13 Oct 00 03:13:06 EDT
Contents:
Linux (Ron)
Re: Redhat 6.2 (Brian)
Re: RH6.2 login is now broken - how to fix? ("Gene Heskett")
Adding SCSI card to Linux system (Michael Eager)
Re: logout ("St. Otto")
Re: Linux Swap File (Paul Kimoto)
Re: Cant� connect to ISP ("Henrik & Stine")
Re: Redhat 6.2 (Eric)
Re: Linux (Kousik Nandy)
Re: HP Deskjet 720c printer drivers ("Jack Kessler")
Re: Linux Partition Link Corrupted (Eric)
Persistent password problem (Ron Ho)
Lpd hangs at startup when remote printer is offline and there are jobs (Boris Benko)
Re: soffice51 install ("Jack Kessler")
Re: A new directory hierarchy standard - need opinions (Villy Kruse)
Re: RH7 - slow boot - loading linux (Boris Benko)
Re: cant connect to internet ("Jack Kessler")
----------------------------------------------------------------------------
From: Ron <[EMAIL PROTECTED]>
Subject: Linux
Date: Fri, 13 Oct 2000 05:10:05 -0000
Need help!!!!!! I have Linux Mandrake 7.0 installed on my computer. When I
go to boot to Linux it will come come to the log in but then my desktop
keeps flashing the Linux login screen. What happened was I gave permission
to Linux to run the Xconfig and know I have no idea how to fix this
problem. I am also running Windows 98SE. I have a 500 mhz processor with an
Intel 810 chipset, two harddrives. My ISP is Roadrunner, which is a cable
modem.If you need any other information, please let me now.
Thank-you,
Ron
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: Brian <[EMAIL PROTECTED]>
Subject: Re: Redhat 6.2
Date: Fri, 13 Oct 2000 05:10:06 -0000
Mick wrote:
>
>
> I cannot setup RH6.2 on my pc with 13Gb HDD. I reached the stage where I
can
> setup the mount points and nominate the size ok. RH even acknowledge the
HDD
> is 13Gb - but the "next" button to proceed is greyed out and I can go no
> further!
>
> Any suggestions? (RH6.2 cannot support 13Gb HDD?)
>
>
As far as I know, you need a '/' (root) and /boot partitions as a
minimum. A swap partition, surprisingly, is not actually required - but
it is strongly recommended.
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
Date: 13 Oct 2000 0:52:1 -0500
From: "Gene Heskett" <[EMAIL PROTECTED]>
Subject: Re: RH6.2 login is now broken - how to fix?
Crossposted-To: comp.os.linux.misc,comp.os.linux.networking
Unrot13 this;
Reply to: <[EMAIL PROTECTED]>
Gene Heskett sends Greetings to mnip ;
> I logged in to my RH6.2 mail and web server for the first time in weeks
> today, but the telnet login is now inoperable. I get the RH62 message, but
> no login prompt. I then went over to the physical machine, and a similar
> thing, login: but any input just returns the login: prompt.
> I checked webmin, and that still works, as do the web serrvices, everything
> seems to be in order except the login daemon, or the shell or something I
> don't quite know enough about linux yet to diagnose.
> I figured what the heck, the machine hasn't been rebooted in months. I
> issued the reboot signal, and the machine comes back with the same malady.
> What is going on, and how can I fix it? RH gives a linuxconf option (I did
> install the latest linuxconf rpms), but I don't forsee any magic daemon
> fixes in that interface.
> Please reply with any ideas ASAP. Fortunately, the intended functions seem
> to be uninterrupted, but I'm anxious to login all the same...
You've been hacked. Thats the usual response when a 'rootkit' has been
installed.
Take it offline ASAP to prevent any further useage by the hacker. Then
backup any data you need, and only what you need so as to not backup the
hackers work, wipe the disk clean and reinstall.
Then goto updates.redhat.com and grab and install *all* the fixes
available for 6.2 there.
Make sure tcpwrappers is running too.
If this machine is a working machine, and not a development machine, get
rid of the compiler because if they don't have a compiler, they can't
compile the rootkit on your machine. You can always re-install it
temorarily if you need it for some project or other. Get rid of the
whole rsh package and all the utils in it, also telnet, use ssh instead.
Then hook it up long enough to go get portsentry from www.psionic.com
and install it. Once thats in and running, it might be safe to plug in
the ethernet cable and leave it plugged in again.
That may not be enough to stop a really determined cracker, but its
managed to reject about 30 passes at hacking my office machine so far.
Cheers, Gene
--
Gene Heskett, CET, UHK |Amiga A2k Zeus040, Linux @ 400mhz
email gene underscore heskett at iolinc dot net
#Amiga based X10 home automation program EZHome, see at:#
# <http://www.thirdwave.net/~jimlucia/amigahomeauto> #
ISP's please take note: My spam control policy is explicit!
#Any Class C address# involved in spamming me is added to my killfile
never to be seen again. Message will be summarily deleted without dl.
This messages reply content, but not any previously quoted material, is
� 2000 by Gene Heskett, all rights reserved.
--
------------------------------
From: Michael Eager <[EMAIL PROTECTED]>
Crossposted-To: alt.os.linux.turbolinux,comp.os.linux.help,24hoursupportdesk
Subject: Adding SCSI card to Linux system
Date: Thu, 12 Oct 2000 22:40:42 -0700
I'm running TurboLinux 6 (based on 2.2.13).
The system has two IDE drives.
I've added an Adaptec 2940 SCSI controller. At the moment
it is connected to an external SCSI disk, later I'll connect
it to a tape drive.
I re-installed TurboLinux and setup found the SCSI controller.
Supposedly, it installed a kernel which suppored SCSI drives.
When the CPU starts, the 2940 BIOS starts and finds the disk.
When Linux boots, it doesn't find the SCSI controller.
I added an entry in modules.conf:
alias scsi_hostadapter aic7xxx
This still doesn't work.
/var/log/dmesg says "scsi : 0 hosts"
/proc/scsi/scsi contains "Attached devices: none"
Any suggestions? (please reply by email)
Eager Consulting [EMAIL PROTECTED] www.eagercon.com
------------------------------
From: "St. Otto" <[EMAIL PROTECTED]>
Subject: Re: logout
Date: Fri, 13 Oct 2000 07:51:28 +0200
Martin Schmidt wrote:
>
> Hi,
>
> Is it possible to start a script when logging out ?
> (I use Suse 7.0) .
>
> Thanks in advance,
> Martin
man trap
man signal
'trap' can start commands on signals occuring at any time, also
at logout.
------------------------------
From: [EMAIL PROTECTED] (Paul Kimoto)
Subject: Re: Linux Swap File
Date: 13 Oct 2000 02:00:54 -0500
Reply-To: [EMAIL PROTECTED]
In article <8rvfg8$9n5$[EMAIL PROTECTED]>, [EMAIL PROTECTED] wrote:
> Great, thanks for the reply. I think I do need more swap space. So
> could you (or someone) explain how i go about doing that?
Do you want to add a swap partition or a swap file?
Partition:
Use fdisk (or your other favorite fdisk-like tool) to make a new swap
partition out of the disk space that you didn't have a partition in
before, or to change an existing partition into a Linux swap partition.
(If you don't have any unpartitioned space, and don't want to lose any
existing partitions, then you can't make a new partition.)
Reboot.
Use mkswap(8) to prepare the new swap partition. (See the man page.)
Use swapon(8) to turn on the new swap partition. ( " )
Edit /etc/fstab so that it knows about the new swap partition. Then
it can be turned on automatically each time you boot.
File:
A swap _file_ is more flexible than a swap _partition_, but gives
poorer performance (because of the overhead of the filesystem).
Consult http://www2.linuxjournal.com/help/ligs/node187.html to see
how to add one.
--
Paul Kimoto
This message was originally posted on Usenet in plain text. Any images,
hyperlinks, or the like shown here have been added without my consent,
and may be a violation of international copyright law.
------------------------------
From: "Henrik & Stine" <[EMAIL PROTECTED]>
Subject: Re: Cant� connect to ISP
Date: Fri, 13 Oct 2000 07:57:23 +0200
This piece of advice solved the problem!
Thx for your help everyone!
H. Larsen
repo <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Henrik & Stine wrote:
> >
> > Hey!
> >
> > I have for some days now tried to connect to my ISP thrugh an ordinary
> > (proper) modem. In the Gnome/Enligtenment GUI I find the modem in a
program
> > called internet connection. Its placed on /dev/ttyS0 and when I hit the
> > debug button it dials-up fine (that is, I hear the usual noise). But
then
> > the show stops, and nothing more happens. The program says pppd has died
> > (exit code = 1).
> >
> > When I look in /var/log/messages it says
> >
> > pppd[28662]:the remote system (ppp2) is required to authenticate itself
but
> > I couldn�t find any suitable secret (password) for it to do so
> > ifup-ppp: pppd started for ppp2 on /dev/ttyS0 at 115200
> > modprope: can�t locate module char-major-108
> >
> > These 3 lines are apparently repeated in the log-file for as long as I
try
> > to connect.
> >
> > The OS is RH 6.1 and I had everything up and running 6 months ago, but I
> > just can�t remember what to do to get the modem working!!
> >
> > Any help will be much appreciated
> >
> > H. Larsen
> Hi
> This is caused by a pppd-2.3.10 finding a default route on the eth0
> interface. The error message has be clarified in ppp-2.3.11.
> Fix this by:
> editing /etc/sysconfig/network and
> /etc/sysconfig/network-scripts/ifcfg-eth0
> and deleting everything after the equal sign for GATEWAY= and
> GATEWAYDEV=
> If you are using the GUI admin tool, remove the bogus gateway then
> verify
> that the above files are fixed.
>
> --
> Good Luck
> Repo
>
> http://beginnerslinux.saxen.net/
> http://beginnerslinux.org/
> Linux Red Hat 6.0 Kernel 2.2.5-15 on an i586
> 7:08pm up 2 days, 18:38, 1 user, load average: 0.31, 0.37, 0.31
------------------------------
From: Eric <[EMAIL PROTECTED]>
Subject: Re: Redhat 6.2
Date: Fri, 13 Oct 2000 08:10:28 +0200
Reply-To: [EMAIL PROTECTED]
MT wrote:
>
> Eric <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED]...
> > Mick wrote:
> > >
> > > I cannot setup RH6.2 on my pc with 13Gb HDD. I reached the stage where I
> can
> > > setup the mount points and nominate the size ok. RH even acknowledge the
> HDD
> > > is 13Gb - but the "next" button to proceed is greyed out and I can go no
> > > further!
> > >
> > > Any suggestions? (RH6.2 cannot support 13Gb HDD?)
> >
> > No that's not the problem, but you will need to make at least a
> > partition called / (known as the root partition, so it's *not* called
> > /root !!!) (and perhaps a swap). Otherwise you cannot proceed.
> not 'perhaps' but for shure, youll have to make a swap, and perhaps you'll
> need tho know, that you can't set a mount point for swap space...
> >
> > Eric
You definitely do not *NEED* a swap. You *CAN* make use of a swap
(file/partition). I was just not sure if disk-druid forces you to make
one.
(I think it doesn't)
Eric
------------------------------
From: [EMAIL PROTECTED] (Kousik Nandy)
Subject: Re: Linux
Date: 13 Oct 2000 05:55:54 GMT
On Fri, 13 Oct 2000 05:10:05 -0000, Ron wrote:
> go to boot to Linux it will come come to the log in but then my desktop
> keeps flashing the Linux login screen. What happened was I gave
> permission to Linux to run the Xconfig and know I have no idea how to fix
> this problem. I am also running Windows 98SE. I have a 500 mhz processor
> with an Intel 810 chipset,
Hi Ron,
you need to get the display driver for i810 from say
http://support.intel.com/support/graphics/intel810/
Reboot your machine, at LILO prompt write "linux 3"
(without quotes). It'll go to text mode, install the
driver as instructed, and do "startx". If it worked
fine, you'll get graphical login prompt from next reboot.
HTH,
Kousik
--
__^__ __^__
( ___ )----------------------------------------( ___ )
| / | KOUSIK NANDY kousik.n(a)analog.com | \ |
| / | | \ |
|_/_| #include <disclaimer.h> |_\_|
(_____)----------------------------------------(_____)
------------------------------
From: "Jack Kessler" <[EMAIL PROTECTED]>
Subject: Re: HP Deskjet 720c printer drivers
Date: Thu, 12 Oct 2000 23:16:12 -0700
I have the same problem with an HP LaserJet 4p. It works fine under Window
but I don't see anyway to install it in Red Hat 6.2 without buying a
postscript cartridge which I otherwise have no need for.
Markus Kossmann <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> ELLIS wrote:
> >
> > I recently installed red hat ver. 6 on my pc only to find that I could
not
> > set up my printer. A trip to the hewlettpackard website in search of
drivers
> > and I discovered that hp doesn't support the linux environment. Moreover
it
> > looks as if the information required to write drivers for this printer
has
> > only been released to microsoft.
> >
> > Has anybody had the same problem and found a way round it?
> >
> Have a look at http://sourceforge.net/projects/pnm2ppa/
>
> --
> Markus Kossmann
> [EMAIL PROTECTED]
------------------------------
From: Eric <[EMAIL PROTECTED]>
Subject: Re: Linux Partition Link Corrupted
Date: Fri, 13 Oct 2000 08:16:38 +0200
Reply-To: [EMAIL PROTECTED]
Bruceh wrote:
>
> Eric... here it is...
>
> Disk /dev/hda: 240 heads, 63 sectors, 2343 cylinders
> Units = cylinders of 15120 * 512 bytes
>
> Device Boot Start End Blocks Id System
> /dev/hda1 * 1 586 4430128+ b Win95 FAT32
> /dev/hda2 587 2343 13282920 f Win95 Ext'd (LBA)
> /dev/hda5 587 594 60448+ 83 Linux
> /dev/hda6 1173 2343 8852728+ b Win95 FAT32
> /dev/hda7 595 871 2094088+ 83 Linux
> /dev/hda8 872 941 529168+ 82 Linux swap
> /dev/hda9 942 1172 1746328+ 83 Linux
>
> -bruceh-
>
> Eric wrote:
>
> > Could you post the result of fdisk -l /dev/hda
> >
> > Eric
The partition type of /dev/hda6 is wrong. It should be type c and not b.
I cannot guarantee you that changing it will be without side effects.
The entire extended partition may be/get corrupted (even if you do not
change it). So I'd back-up whatever you can change the type and cross
your fingers.
Eric
------------------------------
From: [EMAIL PROTECTED] (Ron Ho)
Crossposted-To: comp.os.linux.misc
Subject: Persistent password problem
Date: 12 Oct 2000 23:12:46 -0700
help. i'm confused.
i have a linux redhat 6.2 (2.2.14-5.0smp) machine. in my /etc i have two
files for passwords and shadows:
chubba-<28> ls -al /etc/pass*
-rw-r--r-- 1 root root 576 Oct 12 22:27 /etc/passwd
-rw-r--r-- 1 root root 576 Oct 12 22:27 /etc/passwd-
chubba-<29> ls -al /etc/shad*
-r-------- 1 root root 545 Oct 12 22:27 /etc/shadow
-r-------- 1 root root 545 Oct 12 22:27 /etc/shadow-
first, what are these secondary files? "passwd-" and "shadow-"?
second, why is my entry the only one that differs between the two?
(entries below truncated for brevity and my peace of mind)
[root]# diff /etc/shad*
21c21
< ronho:$1$Krxwhgpn$Q(snip):11243:0:99999:7:-1:-1:134537756
---
> ronho:$1$Ylp4SnO4$2(snip):11243:0:99999:7:-1:-1:134537756
how did i do this?
third, and most confounding:
a few days ago, i changed my password, by running "passwd" as myself.
today i noticed that my old password still worked. let's say my old
password was "foo," and my new password is "bar." so both "foo" and
"bar" work for me. (HUH?)
if i run passwd again, and change "bar" to "gack," then now i can log in
using "foo" and "gack" (but not bar). somehow, the system allows me to
use my old password even if my new password is changed.
same thing happens if i run "passwd ronho" as root, and change "gack"
to "oik." now "foo" and "oik" work.
same thing happens if i:
- run pwunconv
- delete the "ronho" entry from the passwd file
- as root, run "rm -f /etc/shad*"
- run pwconv to restore the shadow passwords
- run useradd to recreate my account
- as root, do "passwd ronho" and set it to "baa"
now "foo" and "baa" work. holy smokes.
BUT...
here's the kicker. my home directory is nfs-mounted. NONE OF THIS
FOOLISHNESS WORKS IF THE HOME DIRECTORY IS NOT MOUNTED. i.e. if as root,
i "umount -a," then login, i cannot use "foo"! i can only use "baa" (or
whatever the latest correct password is).
but as soon as i mount the home directory, the problem of the old
persistent password reappears.
what am i doing? i think it should be something simple, but i can't
figure it out.
thanks in advance!
yours in frustration,
ron
------------------------------
From: Boris Benko <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking
Subject: Lpd hangs at startup when remote printer is offline and there are jobs
Date: Thu, 12 Oct 2000 06:33:54 +0200
This is a multi-part message in MIME format.
==============A7B69D36D98F8435E649EC3E
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi there!
I have a problem and I can't get rid of it. I have a lpd installed on
RedHat 6.0 (but please note that the problem is the same on another box,
RH 6.2). I've got about 50 remote printers in /etc/printcap and
everything works ok, but...
If there is a job for the remote printer and the printer is not switched
on (remote printers are HP JetDirects) the daemon *HANGS* when being
restarted. I have no special reason to restart it, but, from time to
time (once in three months or so) I have to reboot the machine (for
other reasons, like upgrading the disk, etc...) or I have to restart the
daemon itself (again for some other reason).
The problem is, that the daemon won't come up. It hangs at the point
when it tries to connect to the printer which is not switched on. So...
I have to clean up the queue and restart lpd again. And then it's ok.
How to prevent the daemon from hanging?
Thanks in advance for your answer!
=b
==============A7B69D36D98F8435E649EC3E
Content-Type: text/x-vcard; charset=us-ascii;
name="Boris.Benko.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Boris Benko
Content-Disposition: attachment;
filename="Boris.Benko.vcf"
begin:vcard
n:Benko;mag. Boris
tel;cell:+386 41 337 180
tel;fax:+386 2 5302 929
tel;home:+386 2 5371 499
tel;work:+386 2 5302 964
x-mozilla-html:FALSE
org:Telekom Slovenije, d.d.;PE Murska Sobota
adr:;;Bakovska ulica 27;Murska Sobota;;9000;Slovenija
version:2.1
email;internet:[EMAIL PROTECTED]
title:software development
fn:mag. Boris Benko
end:vcard
==============A7B69D36D98F8435E649EC3E==
------------------------------
From: "Jack Kessler" <[EMAIL PROTECTED]>
Subject: Re: soffice51 install
Date: Thu, 12 Oct 2000 23:29:36 -0700
What these other fellows are omitting to mention, is that after you install
soffice with the /net switch while logged in as root, you must then install
it again while logged in as the user. In the course of the user
installation, you will see a screen asking if you want a full installation
(119 MB) or a workstation installation (2 MB). Of course you want only the
workstation installation, which installs 2 MB in the user's home directory
and shares the files installed in the root installation. You do this for
each user.
C. Shen <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> I had install a SUN office (soffice51) on my linux machine. I installed
> it as a root, but now I can not use it as a normal user. When I login as
> a normal user, under xterm, I enter "soffice", and wait for a while(it
> seems it is runing under background), but nothing happend. If I change
> into root, I can run it very well.
> what's wrong with my configuration?
>
> Thanks for your help.
>
> chao
>
------------------------------
From: [EMAIL PROTECTED] (Villy Kruse)
Crossposted-To:
comp.os.linux.development.system,comp.os.linux.admin,comp.os.linux.networking
Subject: Re: A new directory hierarchy standard - need opinions
Date: 13 Oct 2000 06:44:42 GMT
On 13 Oct 2000 01:05:33 GMT, Todd Knarr <[EMAIL PROTECTED]> wrote:
>
>That's one I haven't seen. All the /opt systems I've run into use
>directories of the form /opt/{package}/..., often including bin, lib
>and include directories for the package. I've never run into one with
>/opt/bin on it's own. Then again, I don't work with Sun much which may
>explain that.
>
Anyone seen the SCO Open Server 5. Everything in the /opt directory,
and the traditional locations replaced by symlinks. A real mess, if
you'd ask me. Of course, the /opt/{package}/... is a neat way to
isolate the name spaces so you can't get name conflict. Sun suplied
packages with have the prefix SUN and SCO supplied packages would have
the prefix SCO, and so on, which is fine if you take a package in
isolation. However it is not convinient if all the executables are
scattered all over the place, and ditto for the include files needed
for compiling.
Villy
------------------------------
From: Boris Benko <[EMAIL PROTECTED]>
Subject: Re: RH7 - slow boot - loading linux
Date: Thu, 12 Oct 2000 06:43:47 +0200
This is a multi-part message in MIME format.
==============FC85184CE9C0553B6F58BD22
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I guess you should provide more information about what's going on.
There are several possible reasons:
1. There is a misconfiguration in SCSI setup and the controller is not able
to properly recongnize all devices. It is also possible that you don't have
SCSI buses terminated correctly. This is abnormal situation and you should
fix it.
2. It is possible to configure a SCSI disk device to startp up a *MOTOR* of
the drive when it gets a powerup SCSI command (the command may come from the
controller OR from operating system). And this may take awhile, especially if
you have three disks (or even more) or you have some very fast spinning
drives. An old 7200 RPM Seagate Barracuda 4gig drive needs quite some time to
spin up. You will see a message like "Spining up......" or something similar.
3. Your LILO time to wait is configured too high. You should reconfigure it
to wait at most 15 seconds or so.
=b
rfisher wrote:
> I have RH7 on several boxes. Notice that for some reason the boxes with
> SCSI drives take forever (like two minutes) to get past "loading
> linux........." prompt which happens immediately after LILO starts. IDE
> boxes are booting at least 3-4 times faster. Anybody know what processes
> are running at that point and how to tweak them?
>
> Ron
==============FC85184CE9C0553B6F58BD22
Content-Type: text/x-vcard; charset=us-ascii;
name="Boris.Benko.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Boris Benko
Content-Disposition: attachment;
filename="Boris.Benko.vcf"
begin:vcard
n:Benko;mag. Boris
tel;cell:+386 41 337 180
tel;fax:+386 2 5302 929
tel;home:+386 2 5371 499
tel;work:+386 2 5302 964
x-mozilla-html:FALSE
org:Telekom Slovenije, d.d.;PE Murska Sobota
adr:;;Bakovska ulica 27;Murska Sobota;;9000;Slovenija
version:2.1
email;internet:[EMAIL PROTECTED]
title:software development
fn:mag. Boris Benko
end:vcard
==============FC85184CE9C0553B6F58BD22==
------------------------------
From: "Jack Kessler" <[EMAIL PROTECTED]>
Subject: Re: cant connect to internet
Date: Thu, 12 Oct 2000 23:54:50 -0700
Yes, I have a very specific suggestion. Go to this URL,
http://axion.physics.ubc.ca/ppp-linux.html, and print out the HOWTO there.
Follow the instructions carefully and exactly and you should connect. Don't
skip or ignore anything in the instructions. Afterwards send a note of
gratitude to the author, who is apparently a student at UBC and part-time
benefactor of the human race.
patrick <[EMAIL PROTECTED]> wrote in message
news:39e5bff2$[EMAIL PROTECTED]...
> hi there,
>
> im trying to connect to the internet using debian and wvdial.
>
> i have established a nameserver configuration file, and created
> a link from the serial port connected to the modem to /dev/modem.
>
> my reference then suggests the following two commands
>
> 1. type in - route del default
> output - SIOCDELRT: No such process
>
> 2. type in - wvdial
> output - cannot open /dev/modem: Input/output error
>
> anyone with any suggestions?
>
> patrick
>
>
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.setup) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
