Linux-Setup Digest #873, Volume #19 Sat, 21 Oct 00 08:13:06 EDT
Contents:
What is SAMBA? ("Lamar Thomas")
Re: I've broken it !! Win 2K RedHat 6.2 boot ([EMAIL PROTECTED])
Re: Newbie to linux; I screwed up my X, now what? (Stanislaw Flatto)
Re: Newbie to linux; I screwed up my X, now what? ("bluster")
how to setup pop3 service in RH7.0 ("Jimmy HSIEH")
Re: jpilot install user - please help (Phillip Deackes)
Re: Tulip driver/Compile Network Everywhere NIC NC100 ([EMAIL PROTECTED])
Re: how to setup pop3 service in RH7.0 ("Jimmy HSIEH")
Re: how to setup pop3 service in RH7.0 ([EMAIL PROTECTED])
Re: Newbie to linux; I screwed up my X, now what? ([EMAIL PROTECTED])
Re: "Branded" machines and linux ([EMAIL PROTECTED])
kheader??? ([EMAIL PROTECTED])
easy question on Gnome ([EMAIL PROTECTED])
Re: Install eDesktop 2.4 on Windows ME (Terry)
Re: Minimal embedded linux? (Vlastimil Pohnetal)
Re: What is SAMBA? (Steve Withers)
Re: "Branded" machines and linux (Steve Withers)
Linux accessing a printer hooked to ethernet. (Hugh)
Re: Which IP is real IP? (Steve Withers)
----------------------------------------------------------------------------
From: "Lamar Thomas" <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.redhat,linux.redhat.install,linux.redhat.misc,linux.redhat.rpm,redhat.security.general
Subject: What is SAMBA?
Date: Sat, 21 Oct 2000 07:18:05 GMT
Hi,
I am very new to Linux and I just wanted to know what is SAMBA? What is it
used for? Do I install it on a workstation or server? Thanks,
Lamar
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: I've broken it !! Win 2K RedHat 6.2 boot
Date: Sat, 21 Oct 2000 07:21:39 GMT
Hi Carl,
Sorry that I wasn't more clear in my first post, but you should post
the result of fdisk -l /dev/hda and fdisk -l /dev/hbd (Notice the
absence of partition numbers) Otherwise you will indeed get a cannot
find valid partitiontable respons.
No in you lilo.conf I don't see what could be wrong, but are you
booting from /dev/hda? or did you in your BIOS enable booting from the
second disc? What I mean is actually, are you sure this is the
lilo.conf that is executed by lilo? What happens if you issue
`/sbin/lilo -v` (IIRC it's -v, check the manpage, you want the verbose
switch)
I'm not sure if it's needed, but I always put it in, the other parts
has no line "table = /dev/hda" (without the quotes) try putting it in.
Eric
In article <[EMAIL PROTECTED]>,
Carl Waring <[EMAIL PROTECTED]> wrote:
> Well here we go then this is what came up from fdisk -l /dev/hdb1
(which is
> my boot partition), the last line metioning a valid partition table
came back
> at the prompt and not within the output file.
>
> Disk /dev/hdb1: 16 heads, 63 sectors, 19885 cylinders
> Units = cylinders of 1008 * 512 bytes
>
> Disk /dev/hdb1 doesn't contain a valid partition table
>
> And this is my /etc/lilo.conf file:
>
> boot=/dev/hda
> map=/boot/map
> install=/boot/boot.b
> prompt
> timeout=50
> linear
> default=win
>
> image=/boot/vmlinuz-2.2.14-6.1.1
> label=linux
> read-only
> root=/dev/hdb8
>
> other=/dev/hda1
> label=win
>
> I might add here that I can no longer boot into anything unless I use
my
> RedHat boot floppy !!
> I've decided to scrap my Windows 2000 disk and re-format it, I'm
going to
> install 2000 once I've
> figured this problem out.
>
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: Stanislaw Flatto <[EMAIL PROTECTED]>
Subject: Re: Newbie to linux; I screwed up my X, now what?
Date: Sat, 21 Oct 2000 18:36:02 +1000
rich wrote:
> I'm such a moron.
Hi friend, don't call my friend names!
Mucking up any part of the OS, that's what makes Linux such wonderfull toy.
Now: "Have been in this movie". So up your sleeves, and do it Linux-way.
(Note: I am using Slackware so the placing of items may be in different
directories)
In textual screen log in as root.
cd /var/X11R6/bin
ls -l #should display a link X->/usr/X11R6/bin/XF86_YYYY (the server)
Now:
rm X #remove the link
ln -s /usr/X11R6/bin/XF86_???? X (where the ??? is the server you want
to invoke when startx'ing) you create a new soft link
Just make sure that the server exist in the called directory.
Have fun.
Stanislaw
------------------------------
From: "bluster" <[EMAIL PROTECTED]>
Subject: Re: Newbie to linux; I screwed up my X, now what?
Date: Sat, 21 Oct 2000 05:10:31 -0400
rich <[EMAIL PROTECTED]> wrote:
Hi Rich,
>
> I'm such a moron.
naaa...
> I discovered that in /usr/X11R6/bin that my X entry was linked to the
> Mach64 X binary, and the chip detection was reporting (and I verified
> visually) that the chip was an S3 chip. This is after I have had a
> myriad of problems related to X that were completely mystifying me. I'm
> not sure how it thought I had a Mach 64 chip, but that's water under the
> bridge.
Ok so you need the S3 X-server binary, or maybe the S3V (ViRGE).
> So I said to myself, "Self," I said, "All I have to do is link the S3
> binary to the directory entry 'X' and Bob's yer uncle."
Sounds ok, if the S3 server RPM is installed already.
> Well, I did the
> link the wrong way and now I don't have any X server whatever.
> Whenever I run startx it dies with an error message "expecting server"
> or something like that. In retrospect, that wouldn't have worked
> anyway because I didn't install the S3 binary before I did it, but if I
> had done it, it would've clobbered the binary.
Ooops, yep it's ln -s <file-to-link-to> <name-of-link-to-create>
*not* the other way around. :(
> Well, it's obvious *now* what happened.
I always remember these lessons quite clearly after learning
them this way. ;-)
> What is not obvious is how I fix it.
>
> This is a Red Hat 6.0 system (I know, I know it's old and I've heard
> it's buggy -- 7.0 is on order from Cheapbytes.) I try and uninstall
> the RPM for the Mach64 X server and it reports that it's not there. Do
> I need to do this before I install the S3 binary?
Nope, the S3 RPM just adds a file (XF86_S3) to the /usr/X11R6/bin
dir (and a man page), no problems if both server files are there.
The link you make (/etc/X11/X) sets the server that startx will use.
> I think -- absent just finding my DOS disk, booting this sucker up in
> DOS and starting the setup again, that I need to get a better clue on
> setting up Red Hat, and RPMs in particular.
The RPM man page is a good place to start, re-running the RH
setup sounds like overkill to me, (you don't even need to reboot
linux, let alone re-install) just install the RPM for
S3 which will add the driver to the /usr/X11R6/bin dir,
and create the link to it:
[root@zephyr]# rpm -ivh /path/to/cd/RedHat/RPM/XFree86-S3-*
[root@zephyr]# ln -s ../../usr/X11R6/bin/XF86_S3 /etc/X11/X
> And not to segue to far afield, but will I need to do this booting-to-DOS
> thing to upgrade my system to Red Hat 7.0? Or can I just mount the CD
> and type /mnt/cdrom/install?
You do not need DOS, mount the CD and view the README file
for instructions. I'm holding out for the 2.4 kernel before I
upgrade my RH6.2 box.
> And is there an RPM-howto somewhere?
http://rpm.redhat.com/RPM-HOWTO/
Hope this helps!
Bluster
------------------------------
From: "Jimmy HSIEH" <[EMAIL PROTECTED]>
Subject: how to setup pop3 service in RH7.0
Date: Sat, 21 Oct 2000 17:42:15 +0800
Hi,
I had just upgrade my server from RH6.1 to an new install RH7.0, and I find
that there is no file "inetd.conf" in /etc. and I can't find "imap*.rpm" in
the disk 1 of RH7.0.
So how to setup a pop3 service in my server?
please give me a hint.
thank you
Jimmy HSIEH
------------------------------
From: [EMAIL PROTECTED] (Phillip Deackes)
Subject: Re: jpilot install user - please help
Date: Sat, 21 Oct 2000 09:44:37 GMT
In article <8sk7gg$n6m$[EMAIL PROTECTED]>, [EMAIL PROTECTED] wrote:
>I am trying to run jpilot under linux to synchronize my palm pilot. I
>was able to use my knowledge of linux and online support information to
>get jpilot to see my palm pilot, however I am unable to synchronize due
>to the following error:
>
>Sync Problem - This palm has a NULL user id. It may have been hard
>reset. J-Pilot will not restore a palm yet. Use pilot-xfer to restore
>the palm and install-user to add a username and user ID to the palm.
>Read the user manual if you are uncertain.
>
>I have checked the palm user manual to see if I could do this on the
>palm itself, but could not find the information. I also checked jpilot's
>website, and was unable to find any info. I scanned the newsgroups and
>have looked for howtos. Still nothing.
This can be done. You should have the pilot-link package installed since
this is required for most palm tools. The partucular pilot-link utility
you need to use is 'install-user'. If you do 'man install-user' you will
get all the info you need.
Hope this helps.
--
Phillip Deackes
Using Storm Linux 2000
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: comp.os.linux.redhat
Subject: Re: Tulip driver/Compile Network Everywhere NIC NC100
Date: Sat, 21 Oct 2000 10:08:47 GMT
Actually, I found the problem to be the headers for 2.2.22-16 weren't
in the right place at the right time...
After I put them there it worked fine...
In article <8snlpb$dio$[EMAIL PROTECTED]>,
"Larry Clark" <[EMAIL PROTECTED]> wrote:
> are you saying you use the source from the CD to install support for
that
> specific driver? after that was installed it would recognize it, and
then
> use the source for the scyld one? I am a little confused with the way
you
> wrote the reply thanks, larry
> Paul Meyer~ <[EMAIL PROTECTED]> wrote in message
> news:8snjhv$[EMAIL PROTECTED]...
> > Just been through this, clean RH7.0 install, linksys etherfast
10/100
> > 4.1 card, won't work with shipped tulip driver.
> >
> > Downloaded the full www.scyld.com network driver rpm and installed
it,
> > but it barfed on compiling pci_skeleton. It turned out that the
> > kernel source was not installed by default, and source files from
> > there were needed by the network driver package compile. I used rpm
> > to install the kernal source code off the cd, then used rpm to
install
> > the network driver package from scyld, and everything worked. My
> > linksys tulip card is up and running.
> >
> > If you need more details on what I did, send me mail.
> >
> > Good luck,
> >
> > Paul Meyer
> > [EMAIL PROTECTED]
> > I speak for myself, not for Intel.
> >
> >
> >
> > In article <[EMAIL PROTECTED]>,
> > anthony f <[EMAIL PROTECTED]> wrote:
> > >I'm trying to obtain the latest tulip.o build for a Network
Everywhere
> > >(Linksys subsidiary) NC100.
> > >
> > >I've obtained the latest source from
> > >http://www.scyld.com/network/tulip.html. I can't seem to get it to
> > >compile - I don't have the generated errors handy...
> > >
> > >From what I've gathered, the version of tulip.o that's been
shipping
> > >with RH for a while isn't the latest which this NIC needs.
> > >
> > >If anyone has an Intel build of a later version, preferrably from
RH 7,
> > >please notify me - I'd appreciate it. [EMAIL PROTECTED]
> > >
> > >--
> > >Sonnik,
> > >from Sonnik Innovations
> > >(to e-mail, delete "_nospam" from address)
> > >
> > >
> >
> >
>
>
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: "Jimmy HSIEH" <[EMAIL PROTECTED]>
Subject: Re: how to setup pop3 service in RH7.0
Date: Sat, 21 Oct 2000 18:31:33 +0800
It's me again
I had just find the file "inetd.conf" is changed become a dir "xinetd.d"
you can change deamon's setting inside this dir.
bye
"Jimmy HSIEH" <[EMAIL PROTECTED]> ���g��l��
news:8srogc$[EMAIL PROTECTED]...
> Hi,
> I had just upgrade my server from RH6.1 to an new install RH7.0, and I
find
> that there is no file "inetd.conf" in /etc. and I can't find "imap*.rpm"
in
> the disk 1 of RH7.0.
> So how to setup a pop3 service in my server?
> please give me a hint.
> thank you
>
> Jimmy HSIEH
>
>
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: how to setup pop3 service in RH7.0
Date: Sat, 21 Oct 2000 10:32:45 GMT
I'm not 100% certain but I think the daemon is now xindetd or some
variant... check /etc for xinet* files...
In article <8srogc$[EMAIL PROTECTED]>,
"Jimmy HSIEH" <[EMAIL PROTECTED]> wrote:
> Hi,
> I had just upgrade my server from RH6.1 to an new install RH7.0, and
I find
> that there is no file "inetd.conf" in /etc. and I can't
find "imap*.rpm" in
> the disk 1 of RH7.0.
> So how to setup a pop3 service in my server?
> please give me a hint.
> thank you
>
> Jimmy HSIEH
>
>
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: Newbie to linux; I screwed up my X, now what?
Date: Sat, 21 Oct 2000 10:37:44 GMT
In article <[EMAIL PROTECTED]>,
[EMAIL PROTECTED] wrote:
> I discovered that in /usr/X11R6/bin that my X entry was linked to the
> Mach64 X binary, and the chip detection was reporting (and I verified
> visually) that the chip was an S3 chip.
Just out of curiosity... manufacturer/vendor of display card?
> And is there an RPM-howto somewhere?
Yes, try
http://www.linux.org/docs/ldp/howto/RPM-HOWTO/index.html
They also have a lot of other How-To's at www.linux.org also
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: "Branded" machines and linux
Date: Sat, 21 Oct 2000 10:40:39 GMT
In article <[EMAIL PROTECTED]>,
marvin greenberg <[EMAIL PROTECTED]> wrote:
> Does anyone have any experience putting linux onto these? Any
> issues with their (typically) strange propietary bioses or onboard
> video, etc.?
I've gotten Red Hat installed on a Friend's old Compaq Presario.
Video/Sound was fine...
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: [EMAIL PROTECTED]
Subject: kheader???
Date: Sat, 21 Oct 2000 03:52:19 GMT
I configured my kernel after having a working kernel (so I sort of
know what things were working and what things weren't). When I booted
after installing the new kernel I got this failure in bootup
kheader [FAILED]
Have no idea what it is. Can anybody help?
Also, one other quirky thing. I have the Linksys Ethernet PCMCIA
card, which is supported under the pcnet_cs (generic NS8390-based
PCMCIA Ethernet Driver) driver. When I did my original install, I had
to active it the first time, but all times after that it would just
activate (and I didn't have "activate at boot" selected). Then, after
I configured my kernel and reinstalled pcmcia for the new kernel, it
no longer activated at bootup. So what happens is that SMB won't
start right because I have no active interfaces. One other thing that
is strange is that the place for activating an ethernet card at bootup
comes before PCMCIA bootup. Is there anyway to change the order? But
from what I have determined, you don't have to select boot at startup
unless absolutely necessary. Like I said, this thing was activating
at bootup without the selection. Can anyone over advice???
Thanks,
Dan Allen
------------------------------
From: [EMAIL PROTECTED]
Subject: easy question on Gnome
Date: Sat, 21 Oct 2000 03:55:03 GMT
KDE has an Autostart folder...is there an equivalent in Gnome??
Thanks,
Dan Allen
------------------------------
From: Terry <[EMAIL PROTECTED]>
Crossposted-To:
alt.linux,alt.os.linux.caldera,comp.os.linux.misc,comp.os.linux.questions
Subject: Re: Install eDesktop 2.4 on Windows ME
Date: Sat, 21 Oct 2000 06:31:23 -0500
Gordon Berta wrote:
>
> Really any one out there no how to do this without loosing windows files or
> operating system.
> [EMAIL PROTECTED]
Sure, just run the limited version of Partition Magic comes on Caldera's
disk and partition for Linux and don't use the whole disk, or disks
whichever the case may be, and then install onto those partitions. Only
thing is, they say you have to get creative about the MBR when running
ME so check on that first.
The following quoted from:
file:///home/httpd/html/openlinux_help/UG/ch02.html#pgfId-918200
Step One: Preparing Your Computer
Make sure that your peripheral hardware--your printer, modem,
network cards--are
connected and turned on.
With Windows up and running, insert your OpenLinux Windows Tools &
Commercial Products CD. The program should start automatically. If
it doesn't,
then click the Start button, and on Run. In the Run window, type:
G:\winsetup\winset.exe
Where `G' is your CD-ROM's drive letter. Then click the OK button.
The OpenLinux
eDesktop 2.4 welcome screen appears (See The Installation Welcome
Screen, With
the PowerQuest Utilities Button Selected.).
--
The alt.os.linux.caldera FAQ:
http://netllama.ipfox.com/COL_FAQ.html
Step-by-step help for COL problems:
http://netllama.ipfox.com/stepbystep.htm
**********************************************
** Registered Linux User Number 188099 **
**********************************************
------------------------------
From: Vlastimil Pohnetal <[EMAIL PROTECTED]>
Crossposted-To: aus.computers.linux,comp.arch.embedded
Subject: Re: Minimal embedded linux?
Date: Wed, 18 Oct 2000 21:47:58 +0200
Hello,
practice makes perfect.
The miteROUTER-S for example is complete with LINUX 2.0.38.
There is also SSH remote management and root has "qwerty" password to be
able to make settings.
The 386-33/40 MHz with up to 8 MB RAM and 16 MB flash or 486-66 16/16
etc.
If VGA requested see, mitePC board or embedded server.
Sorry no floppy suported (HDD, CF, chipDISK).
Best Regards
V. Pohnetal
[EMAIL PROTECTED]
http://www.mite.cz
=====================
"Russ.Shaw" wrote:
>
> Hi all,
>
> I want to run linux on an embedded 386 or 486 board
> with solid-state hard-disk, one floppy drive, and a
> vga screen.
>
> Is there a good book or something that describes
> what minimum linux components are needed and how
> to set it up?
>
> --
> *******************************************
> * Russell Shaw, B.Eng, M.Eng(Research) *
> * email: [EMAIL PROTECTED] *
> * Victoria, Australia *
> *******************************************
------------------------------
From: Steve Withers <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.redhat,linux.redhat.install,linux.redhat.misc,linux.redhat.rpm,redhat.security.general
Subject: Re: What is SAMBA?
Date: Sun, 22 Oct 2000 00:57:53 +1300
Lamar Thomas wrote:
> Hi,
>
> I am very new to Linux and I just wanted to know what is SAMBA? What is it
> used for? Do I install it on a workstation or server? Thanks,
>
> Lamar
SAMBA lets your Linux or UNIX system participate on a Windows network for file
and print sharing.
So a Linux system can be set up to look like an NT server...even a domain
master server.
The linux samba client tools aren't so good.....command line stuff was all I
saw....though Corel Linux has a great component that loks and acts like Windows
Explorer.....and even sees NSF drives on UNIX systems. Better than anything on
Windows. For fitting into a Windows network, Corel Linux is #1 in my book. But
it can be hard to install as it insists on taking an entire hard disk and there
is no way arounf that. maybe the new release of Corel Linux is more flexible
about that.....I don't know. I mainly use Redhat 6.2.
But I used my Linux system a print and file server for ages for both my Windows
systems and an Apple iBook with "dave" installed on it.
--
Regards,
Steve Withers
[EMAIL PROTECTED]
------------------------------
From: Steve Withers <[EMAIL PROTECTED]>
Subject: Re: "Branded" machines and linux
Date: Sun, 22 Oct 2000 01:02:57 +1300
marvin greenberg wrote:
> I'm thinking about getting an HP, IBM or Compaq desktop to put linux on,
> because these boxes tend to be quieter (for a music server in the living
> room.) Does anyone have any experience putting linux onto these? Any
> issues with their (typically) strange propietary bioses or onboard video, etc.?
>
> Anyone with real concrete experience?
>
> Thanks.
I wouldn't do it.
Ask your local PC parts guy for a quiet case and a quiet hard disk....oh and it all
has to work with Linux.
You put Linux on your "branded" system and you'll get zero support out of the
vendor....but it was built into the price....along with the Microsoft tax for
Windows - whether you got it or not.
--
Regards,
Steve Withers
[EMAIL PROTECTED]
------------------------------
From: Hugh <[EMAIL PROTECTED]>
Crossposted-To: comp.periphs.printers,comp.os.linux.misc
Subject: Linux accessing a printer hooked to ethernet.
Date: Sat, 21 Oct 2000 21:05:41 +0900
John Jordan wrote:
> Hugh <[EMAIL PROTECTED]> dijo a todos por la internet:
>>If you know how the printer filter driver works within Linux,
>>you will understand what I am talking about here.
>>
>>I want to use, from a Linux host, a laser printer which is hooked
>>directly to the ethernet. A printer can have an IP number.
However,
>>if you use it that way, the Linux lpd simply sends a raw request
>>to the host, i.e., the printer. In this case, unlike a Linux or
>>MSWindows
>>host, the printer does not have any printer filter software, i.e.,
the
>>ghostscript software in the case of a Linux.
>>So, basically, printing will fail.
>
>>What can we do about this? In the case of HP printers, they
>>provide Solaris JetDirect Software. However, there is no
>>such thing for Linux.
> First, let me warn you, I'm far from a Linux guru. But I do have a
> computer with Corel Linux on it, and I am using it to print to an HP
> Laserjet 5SiMx on ethernet, and it is working fine.
> For the Laserjet, first you need to set the IP address and subnet
> mask. HP makes JetAdmin software to do this, but it runs only under
>Windows. Luckily I also have an NT machine, so that's how I set the
> address.
> Once you have the IP address and subnet mask set for the printer,
just
> set up the printer on the Linux machine. If you use the KDE shell it
> is a snap -- no more difficult than setting up a printer on Windows.
>The only part I found confusing is that "5Si" was the only printer I
> found in the list -- not "5SiMx." Later I discovered that all
> PostScript printers use the same driver, labeled, surprisingly,
> "PostScript." Once I used that choice, it prints the same from the
> Linux machine as it does from Windows machines.
Maybe, your /etc/printcap contains some information on the ghostscript
driver. In my configuration file /etc/printcap constructed under SuSE,
#
stylus|remote printer on norma:\
:sd=/var/spool/lpd/stylus:\
:rm=norma:\
:rp=lp2:\
:bk:sh:mx#0:
It does not contain any information on the type of the printer.
It says that the name of the remote host is "norma" and
the printer name there is "lp2". That is all. Would you
please post your /etc/printcap file made by the Corel toolkit?
By the way, I am using the lprold...rpm package.
Are you using any of the newer printer spooling system software
such as lprng...rpm or something?
If your /etc/printcap does not contain any driver information,
I think we need to conclude that the network printer must
be a genuine PostScript printer, which is true in your case.
Thank you.
Hugh
------------------------------
From: Steve Withers <[EMAIL PROTECTED]>
Subject: Re: Which IP is real IP?
Date: Sun, 22 Oct 2000 01:10:13 +1300
"Adam H." wrote:
> Hi,
>
> When I dial up to my ISP via PPP (56k modem),
> I can check my /var/log/messages file and I see 2 lines:
>
> Local IP address changed to 203.x.x.x
> Remote IP address changes to 203.x.x.x
>
> Which IP address is the IP address that my ISP assigned me?
>
> (Ie, which IP address does someone have to type in to try and
> access my computer)
>
> TIA
>
> Adam
If you do a "netstat -r", the addresses if you have more than one IP
adapter (ethernet + dial-up....etc..) for your machine will be the ones
in the left column that don't end in zero or 5.
In this example, I have one network card and no modem. Arrow indicates
my IP address in the left column.
Yes.....this example comes from Windows..... :-)
Active Routes:
Network Destination Netmask Gateway Interface
Metric
0.0.0.0 0.0.0.0 10.1.1.1
10.1.1.2 1
10.1.1.0 255.255.255.0 10.1.1.2
10.1.1.2 1
-->>>> 10.1.1.2 255.255.255.255 127.0.0.1
127.0.0.1 1
10.255.255.255 255.255.255.255 10.1.1.2
10.1.1.2 1
127.0.0.0 255.0.0.0 127.0.0.1
127.0.0.1 1
224.0.0.0 224.0.0.0 10.1.1.2
10.1.1.2 1
255.255.255.255 255.255.255.255 10.1.1.2
2 1
Default Gateway: 10.1.1.1
--
Regards,
Steve Withers
[EMAIL PROTECTED]
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.setup) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
