Linux-Setup Digest #579, Volume #20 Tue, 6 Feb 01 18:13:09 EST
Contents:
Re: newbie uninstall linux (Mark Bratcher)
Re: Unpacking ISO-images without a CD burner (Alex Yung)
Re: Howto backup the linux data to tape (L Blaine)
Re: Howto backup the linux data to tape (L Blaine)
Re: linux not booting (John)
kernel 2.4.1 problems (Matthew Bettencourt)
Stumped by random X freezes,slow system (Chet Vora)
Re: newbie uninstall linux (Juergen Sauer)
Re: newbie uninstall linux (Mark Bratcher)
Re: kernel 2.4.1 problems (Mark Bratcher)
Re: Stumped by random X freezes,slow system (Chet Vora)
----------------------------------------------------------------------------
From: [EMAIL PROTECTED] (Mark Bratcher)
Subject: Re: newbie uninstall linux
Date: Tue, 06 Feb 2001 20:13:33 GMT
In article <95pih2$r9p$[EMAIL PROTECTED]>, Prof. Abimbola Olowofoyeku wrote:
>In article <95p4if$h5d$[EMAIL PROTECTED]>
>"Cat Liu" <[EMAIL PROTECTED]> wrote:
>
>> boot with floppy disk, and run 'fdisk /mbr' then.
>
>Just curious - why is 'fdisk /mbr' better than "sys c:" ?
>
I believe these do two different things.
fdisk/mbr updates the _master_ boot record on the hard drive.
sys c: rewrites the io.sys msdos.sys and command.com files
which are specific to one partition.
--
Mark Bratcher
To reply, remove both underscores (_) from my email address
===========================================================
Escape from Microsoft's proprietary tentacles: use Linux!
------------------------------
From: [EMAIL PROTECTED] (Alex Yung)
Crossposted-To:
comp.os.linux,comp.os.linux.admin,comp.os.linux.misc,comp.os.linux.questions
Subject: Re: Unpacking ISO-images without a CD burner
Date: 6 Feb 2001 20:03:14 GMT
Reply-To: [EMAIL PROTECTED]
It is possible if you have access to a Linux machine. You can mount
the ISO file to a loopback device which allows you to inspect the
content of the ISO file and copy out whatever you want. I was a
student once. I can certainly understand if you don't want to buy
from cheapbytes.
If you switch to the Debian distribution, your life will be a lot
easier. You only need to download 4 files to complete your
installation. This installation gives you a basic functioning Linux.
You will download whatever you need based on what software you want to
install down the road.
Richard Snow ([EMAIL PROTECTED]) wrote:
: [EMAIL PROTECTED] wrote:
: >
: > I try to download and install Linux on my computer, but I haven't got a CD
: > burner.
: > The only download methods I can find on the net is iso-images or all the
: > individual files from FTP, which would take me days to download.
: > So I'm wondering if there's any way to unpack or convert the ISO-images to
: > individual files without having to burn a CD.
: > Or if anyone know of a site to download SuSE Linux 7 as a ZIP or similar
: > archive file.
: > All help appreciated, and please no answers like "buy a CD burner".
: >
: > Audun
: try www.cheapbytes.com and order a cd shipped to you. ONly a few
: dollars plus shipping.
------------------------------
From: L Blaine <[EMAIL PROTECTED]>
Subject: Re: Howto backup the linux data to tape
Date: Tue, 06 Feb 2001 20:30:05 -0000
Examples:
Load the tape into the tape drive using the front panel
switch on the tape drive. To backup everything under /home
using a relative path do the following:
cd /home
tar cvf /dev/st0 ./*
Note: I'm assuming /dev/st0 is the device for your tape drive.
I also have the HP 6 tape autoloader. The mt and mtx utility some folks
have referenced permits you to move tapes from the 6 slot cartridge
into the tape drive. The mtx utiltiy can be found here:
http://mtx.sourceforge.net
Duane Healing wrote:
>
>
> I'd give "tar" a shot first.
>
> --
> -Duane
> -DNAware SoftLabs
>
> In article <[EMAIL PROTECTED]>, "wallace"
> <[EMAIL PROTECTED]> wrote:
>
> > Hello All,
> >
> >
> > I have a HP surestore DAT24, RH6.2. questions:
> >
> > How to backup the data to DAT24?
> >
> >
> > Thanks,
> >
> >
> > Wallace
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: L Blaine <[EMAIL PROTECTED]>
Subject: Re: Howto backup the linux data to tape
Date: Tue, 06 Feb 2001 20:30:05 -0000
Load the tape in the drive. Make sure it's not write protected.
The mt and mtx utilties allow you to manipulate the DAT
changer to move the tapes via shell scripts.
Example: Create a relative path backup of the /home directory
structure.
cd /home
tar cvf /dev/st0 ./*
Les
wallace wrote:
>
> This is a multi-part message in MIME format.
> --------------EB76F1A819A2E47060672C87
> Content-Type: text/plain; charset=big5
> Content-Transfer-Encoding: 7bit
>
>
> Hello All,
>
>
> I have a HP surestore DAT24, RH6.2.
> questions:
>
> How to backup the data to DAT24?
>
>
> Thanks,
> Wallace
>
> --------------EB76F1A819A2E47060672C87
> Content-Type: text/x-vcard; charset=big5;
> name="wallace.vcf"
> Content-Transfer-Encoding: 7bit
> Content-Description: Card for wallace
> Content-Disposition: attachment;
> filename="wallace.vcf"
>
> REMOVED INCLUDED FILE:vcard
>
> --------------EB76F1A819A2E47060672C87--
>
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: John <[EMAIL PROTECTED]>
Subject: Re: linux not booting
Date: Tue, 06 Feb 2001 21:12:03 GMT
If you'll do a search of this newsgroup on www.deja.com/, you'll
find that someone else had the same problem not long ago. If I
recall, the problem was that Linux was trying to do some
processor-specific stuff (although I believe their problem was with
a P III). You may be experiencing the same problem.
Don't be surprised if you find you need to re-compile your kernel for
your K6 processor.
In article <95pk9u$m79$[EMAIL PROTECTED]>,
[EMAIL PROTECTED] wrote:
> hi
> i have a little problem (or a big one). i get the following message
from
> my linux box: Uncompressing linux...... and noting more. after
that, my
> computer just freez.
> my old kernel (i still have it and it is just running like it should)
> was compiled on my old pentium 200 mmx. now i have a new
motherbord with
> an amd k6-2/500. the old kernel is running on the amd too. when
i
> compile a new kernel (i think with the same configuration
settings) and
> run lilo and than reboot the computer i get the message
Uncompressing
> linux...... but nothing more.
> Can somebody help? what could be a reason for that?
>
> tanks for help
> oli
>
Sent via Deja.com
http://www.deja.com/
------------------------------
From: Matthew Bettencourt <[EMAIL PROTECTED]>
Subject: kernel 2.4.1 problems
Date: Tue, 06 Feb 2001 15:31:50 -0600
I was able to compile and install the latest kernel on my RH-7.0 system,
however, I am having problems when I try to boot it. I get the message
invalid root, specify with append root=.. or something like that. I
have tried that w/o any luck. Here is my lilo.conf file
{localhost 8} more /etc/lilo.conf
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
linear
default=dos
image=/boot/vmlinuz-2.4.1
label=linux-2.4.1
read-only
root=/dev/hda5
append="root=/dev/hda5"
image=/boot/vmlinuz-2.2.16-3
label=linux
read-only
root=/dev/hda5
append="idebus=66"
{localhost 9} df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda5 18149344 6042864 11184540 36% /
/dev/hda2 21958 10663 10161 52% /boot
/dev/hda7 102454 17 97147 1% /tmp
Does anyone have any ideas where I am going wrong here.???
THanks
Matt
------------------------------
From: Chet Vora <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.x,comp.os.linux.misc
Subject: Stumped by random X freezes,slow system
Date: Tue, 06 Feb 2001 16:42:58 -0500
Hi,
I recently installed RH6.2 on a HP Kayak XA workstation which used to host a
Win9X system before(removed). After having lots of problems with the display
(because of incorrect resolution settings) and the mouse (cursor would position
itself on the LH corner and not move from there. Cured by choosing the right
driver for it), I was able to get XFree86 running on it. But I've been
experiencing sudden random freezes while in Gnome. Also, things seem to be very
slow, though that observation might also hold true when in console mode (without
X). There doesn't seem to be any pattern to the freezes. The one thing worth
mentioning is that the system seems to be using the SCSI driver for the PCI bus.
Relevant o/p of dmesg:
=========================
VFS: Mounted root (ext2 filesystem).
ncr53c8xx: at PCI bus 2, device 0, function 0
ncr53c8xx: 53c875 detected with Symbios NVRAM
ncr53c875-0: rev=0x04, base=0xfbfff800, io_port=0xe800, irq=10
ncr53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
ncr53c875-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/4e/80/01/00/24
ncr53c875-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/a0/00/08/24
ncr53c875-0: on-chip RAM at 0xfbffe000
ncr53c875-0: resetting, command processing suspended for 2 seconds
ncr53c875-0: restart (scsi reset).
ncr53c875-0: enabling clock multiplier
ncr53c875-0: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - version 3.2a-2
scsi : 1 host.
I am also attaching the XF86Config file.
Would appreciate any help.
TIA,
Chet
------------------------------
From: Juergen Sauer <[EMAIL PROTECTED]>
Subject: Re: newbie uninstall linux
Date: 6 Feb 2001 20:59:11 GMT
This is much faster:
boot into linux.
login as root
dd if=/dev/zero of=/dev/hda bs=8192 count=1
press reset
Your harddisk is looking to any OS new like just out of the store ...
Attention, thos kills the whole disk ... in a few seconds, including booting...
mfG
jojo
David <[EMAIL PROTECTED]> schrieb
am Tue, 06 Feb 2001 14:49:42 GMT in comp.os.linux.setup:
> To uninstall from a running linux system do the following.
> boot into linux.
> login as root
> /sbin/lilo -u
> fdisk /dev/hda # or sda depending on your hard drive.
> delete all linux partitions
> quit and save changes
> reboot with a DOS/windoz boot disk.
> enter: fdisk /MBR
> You will need to format the partition or drive back to a DOS/windows
> format
> -----------------------
> Use the installation boot disk to boot the system and follow through the
> install up to the partitioning section. Delete all linux partitions and
> then choose the "Back" button and save the changes when asked. Then
> reboot the system with a windows boot disk and do a:
> fdisk /MBR
> You will have to format the disk backto the DOS format.
>
--
J�rgen Sauer - AutomatiX GmbH, +49-4209-4699, [EMAIL PROTECTED]
http://www.automatix.de to Mail me: remove: -not-for-spawm-
------------------------------
From: [EMAIL PROTECTED] (Mark Bratcher)
Subject: Re: newbie uninstall linux
Date: Tue, 06 Feb 2001 22:04:15 GMT
In article <95poiv$kr3$[EMAIL PROTECTED]>, Juergen Sauer wrote:
>
>
>
>This is much faster:
> boot into linux.
> login as root
> dd if=/dev/zero of=/dev/hda bs=8192 count=1
> press reset
>
If you're already at the DOS prompt, that isn't really faster.
And fdisk/mbr leave your system bootable into Windoze.
--
Mark Bratcher
To reply, remove both underscores (_) from my email address
===========================================================
Escape from Microsoft's proprietary tentacles: use Linux!
------------------------------
From: [EMAIL PROTECTED] (Mark Bratcher)
Subject: Re: kernel 2.4.1 problems
Date: Tue, 06 Feb 2001 22:05:54 GMT
In article <[EMAIL PROTECTED]>, Matthew Bettencourt wrote:
>I was able to compile and install the latest kernel on my RH-7.0 system,
>however, I am having problems when I try to boot it. I get the message
>invalid root, specify with append root=.. or something like that. I
>have tried that w/o any luck. Here is my lilo.conf file
>
>{localhost 8} more /etc/lilo.conf
>boot=/dev/hda
>map=/boot/map
>install=/boot/boot.b
>prompt
>timeout=50
>linear
>default=dos
>
>image=/boot/vmlinuz-2.4.1
> label=linux-2.4.1
> read-only
> root=/dev/hda5
> append="root=/dev/hda5"
[snip]
Why is this append line here?
--
Mark Bratcher
To reply, remove both underscores (_) from my email address
===========================================================
Escape from Microsoft's proprietary tentacles: use Linux!
------------------------------
From: Chet Vora <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.x,comp.os.linux.misc
Subject: Re: Stumped by random X freezes,slow system
Date: Tue, 06 Feb 2001 17:07:27 -0500
This is a multi-part message in MIME format.
==============AC0BA371238EF24EED5670F0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Oops...forgot the XF86Config.
Chet Vora wrote:
> Hi,
>
> I recently installed RH6.2 on a HP Kayak XA workstation which used to host a
> Win9X system before(removed). After having lots of problems with the display
> (because of incorrect resolution settings) and the mouse (cursor would position
> itself on the LH corner and not move from there. Cured by choosing the right
> driver for it), I was able to get XFree86 running on it. But I've been
> experiencing sudden random freezes while in Gnome. Also, things seem to be very
> slow, though that observation might also hold true when in console mode (without
> X). There doesn't seem to be any pattern to the freezes. The one thing worth
> mentioning is that the system seems to be using the SCSI driver for the PCI bus.
>
> Relevant o/p of dmesg:
> -------------------------
> VFS: Mounted root (ext2 filesystem).
> ncr53c8xx: at PCI bus 2, device 0, function 0
> ncr53c8xx: 53c875 detected with Symbios NVRAM
> ncr53c875-0: rev=0x04, base=0xfbfff800, io_port=0xe800, irq=10
> ncr53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
> ncr53c875-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/4e/80/01/00/24
> ncr53c875-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/a0/00/08/24
> ncr53c875-0: on-chip RAM at 0xfbffe000
> ncr53c875-0: resetting, command processing suspended for 2 seconds
> ncr53c875-0: restart (scsi reset).
> ncr53c875-0: enabling clock multiplier
> ncr53c875-0: Downloading SCSI SCRIPTS.
> scsi0 : ncr53c8xx - version 3.2a-2
> scsi : 1 host.
>
> I am also attaching the XF86Config file.
>
> Would appreciate any help.
>
> TIA,
> Chet
==============AC0BA371238EF24EED5670F0
Content-Type: text/plain; charset=us-ascii;
name="XF86Config.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="XF86Config.txt"
# File generated by XConfigurator.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds 1 2 3
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "IMPS/2"
Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Emulate3Buttons
# Emulate3Timeout 50
ZAxisMapping 4 5
Buttons 3
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Hitachi CM1711M"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.8-82.0
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50.0-120.0
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by Xconfigurator:
Section "Device"
Identifier "Cirrus Logic|GD 5465 [Laguna]"
VendorName "Unknown"
BoardName "Unknown"
#VideoRam 4096
#Option "fifo_conservative"
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option line and the
# address that the card maps the framebuffer to.
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
# Use Device "Generic VGA" for Standard VGA 320x200x256
#Device "Generic VGA"
Device "Cirrus Logic|GD 5465 [Laguna]"
Monitor "Hitachi CM1711M"
Subsection "Display"
Depth 32
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "Hitachi CM1711M"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "Hitachi CM1711M"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
Driver "accel"
Device "Cirrus Logic|GD 5465 [Laguna]"
Monitor "Hitachi CM1711M"
Subsection "Display"
Depth 32
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
==============AC0BA371238EF24EED5670F0==
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list by posting to comp.os.linux.setup.
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
