Linux-Setup Digest #91, Volume #21 Sun, 22 Apr 01 16:13:10 EDT
Contents:
Re: Interesting failure rebooting LINUX ("Salim Douba")
Re: Partition questions... ("Michael Pye")
Re: 486 Install Problems (=?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?=)
Building from the bottom up... ("Michael Pye")
Re: Red Hat upgrade to 2.2.19 kernel -- help! (=?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?=)
Re: xinetd/samba & 2000/GNOME stability? ("Peter T. Breuer")
lynx mouse support (Michael Young)
Re: RedHat 7.1 install hangs after selecting installation type (Peter Forsberg)
Re: Building from the bottom up... (J Hayward)
Promise RAID with RedHat 7.1/Mandrake 8.0 ("Larry Snyder")
Re: PPPd - I can't get it to compile into the kernel ("Carsten Cimander,,,")
Help needed with DHCP client setup (@home) ("David Stuart")
Re: Interesting failure rebooting LINUX (Dougie Richardson)
Re: Help needed with DHCP client setup (@home) (The Flying Ape)
Re: Help needed with DHCP client setup (@home) ("David Stuart")
Re: Help needed with DHCP client setup (@home) ("DCE")
Re: Partition questions... (Dave Uhring)
Re: Red Hat upgrade to 2.2.19 kernel -- help! ("B.Y.")
Re: Help needed with DHCP client setup (@home) ("Troy Jesse")
----------------------------------------------------------------------------
Crossposted-To:
comp.os.linux.hardware,comp.os.linux.misc,comp.os.linux.admin,comp.os.linux.help,comp.os.linux.redhat
Subject: Re: Interesting failure rebooting LINUX
From: "Salim Douba" <[EMAIL PROTECTED]>
Reply-to: [EMAIL PROTECTED]
Date: Sun, 22 Apr 2001 17:16:58 GMT
Hi,
This is how the partition table looks like:
Command (m for help): p
Disk /dev/hda: 255 heads, 63 sectors, 524 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 181 1453851 83 Linux
/dev/hda2 182 199 144585 82 Linux swap
/dev/hda3 200 523 2602530 7 HPFS/NTFS
Please note that the disk was intended for dual boot wint Windows NT.
However, even when I tried LINUX only i had the same results.
Salim
------------------------------
From: "Michael Pye" <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.hardware,comp.os.linux.help,comp.os.linux.misc,comp.os.linux.questions,linux.redhat.install
Subject: Re: Partition questions...
Date: Sun, 22 Apr 2001 18:15:01 +0100
Backspace / Del is fixed as follows:
> If your backspace key doesn't work as one (under Redhat 7, not sure which
> other distros this applies to), go in as root, open /etc/X11/xmodmap and
> uncomment the two lines under the i386 header. Bingo. There are similar
> headers for PowerPC and Mac I believe...
(my post in alt.linux the other day...)
MP
"dmayo" <[EMAIL PROTECTED]> wrote in message
news:9bv1ke$ejg$[EMAIL PROTECTED]...
> Halloo!
>
> I recently installed Red Hat Linux 7.0 on my laptop(233 MMX, 3GBHDD,
> 64MBRAM). It's up and running, and apart from the backspace and delete
keys
> which I cannae figure how to fix... the rest is fine. However, I've
started
> reading the Linux System Administration Guide (thanx to all of you who
> recommended me good books to read!!). I am a newbie, of course! I was
> reading on Partitions where it says that you could have more than one
> Primary Partition on your HDD. Is this really possible?
> I used MSDOS fdisk for making my partitions (expecting to get Partition
> Magic this week). I have the following
> Primary 35% (1GB)-where Windows 98 is sitting
> Extended 65% of which
> Logical 1 (d:) 50% (1GB) - used for data
> Logical 2 (e:) 50% - this one is now with Linux native (1GB)- no
longer
> called e:
>
> The question is:
> Could I reduce (using Partition Magic, or fdisk) the size of logical 1 to
> say, half it's actual size in order to increase the space given to Linux?
I
> have intentions of extending it's use. Gonnae get StarOffice soon too....
> basically, I want to transform gradually my Microsoft PC into a Red Hat
> Linux machine. I am still learning at this stage.
>
> Ta very much!
>
> PD: If someone could help me with the backspace and delete keys...
strongly
> appreaciated!!
>
> Dave Mayo
>
>
------------------------------
From: =?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?= <[EMAIL PROTECTED]>
Subject: Re: 486 Install Problems
Date: Sun, 22 Apr 2001 19:38:44 +0200
On Sat, 21 Apr 2001, Rand Simberg wrote:
> I'm trying to bring up my old 486 as a firewall. It has no PCI bus,
> and it has 8 MB of RAM. It has dual EIDE, but it isn't native to the
> board--I'm using a Promise ISA card.
[...]
> So I tried a RH 7.0 disk instead (I wanted to avoid this because I
> feel a little more secure with a 6.2, rather than a 7.0 server, and
> didn't want to hassle with hacking makefiles for new kernels). The
> 7.0 got a little farther, and told me that it was loading Anaconda,
> but after a few minutes, it too dies with a signal 15.
RedHat 7.X does not install on machines with less than 16Mb RAM :(
I think, RedHat 6.X does though.
Rasmus
--
-- [ Rasmus 'M�ffe' B�g Hansen ] --------------------------------------
Computers are like airconditioners:
They stop working properly if you open windows.
========================================= [ Remove 'spam' to reply ] ==
------------------------------
From: "Michael Pye" <[EMAIL PROTECTED]>
Crossposted-To: alt.linux,alt.os.linux,comp.os.linux.misc
Subject: Building from the bottom up...
Date: Sun, 22 Apr 2001 18:30:45 +0100
I've been experimenting with Redhat 7 for a little while now, but I am a
very technically minded user and I am about to have a P100 drop off the
bottom of my home network a new machine arrives and all the others are
shunted down.
So, I want to really get to know Linux and I can't think of a better way
than to try and build a working system from the kernel up until it is
suitable for use as a local web server with apache, mySQL, PHP and co.
I'm looking for a little information before I start. Firstly, where to I
begin. I will have a system with an empty hard disk. I will also have a
machine connected to the net with floppies and a CD burner for transferring
larger files to the new machine so there is not a problem there, but what do
I start with?
I assume I will need an x86 binary distribution of a very basic kernel, bash
shell and ANSI compiler tools to actually make the system move (small /
basic is beautiful, I will compile up to date ones from source when I have a
basic system) as well as a boot disk with disk druid / fdisk (I don't mind
as the system will be clean. Nothing there to mess up...) and a formatter.
What have I missed? I have never tried this before and I am willing to put
time in. I also consider myself a highly competent computer user, though not
very experienced in Linux. The latter shouldn't matter, the point of the
exercise is to gain experience whether it works in the end or not...
Thanks in advance for help / hints. Rest assured you will hear from my again
as I progress :)
Cheers
MP
------------------------------
From: =?ISO-8859-1?Q?Rasmus_B=F8g_Hansen?= <[EMAIL PROTECTED]>
Subject: Re: Red Hat upgrade to 2.2.19 kernel -- help!
Date: Sun, 22 Apr 2001 19:43:29 +0200
On 22 Apr 2001, B.Y. wrote:
> Using rpm 4.0.2-6x, having upgraded mount and nfs-utils
>
> [root@precision /root]# rpm -ivh arc/notyet/kernel-smp-2.2.19-6.2.1.i386.rpm
>Segmentation fault (core dumped)
>
> The install works fine with rpm-3.0.5-9.6x
Hmmm... I vaguely remember something about having to to do rpm
--rebuilddb after the rpm upgrade. Have you upgraded to the lates rpm
verion from the updates?
Rasmus
--
-- [ Rasmus 'M�ffe' B�g Hansen ] --------------------------------------
\ / ASCII ribbon campaign
X against HTML mail
/ \
========================================= [ Remove 'spam' to reply ] ==
------------------------------
From: "Peter T. Breuer" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking
Subject: Re: xinetd/samba & 2000/GNOME stability?
Date: Sun, 22 Apr 2001 19:28:42 +0200
In comp.os.linux.setup Jeff D. Hamann <[EMAIL PROTECTED]> wrote:
> Samba woes?
> 1) where's some doc for xinetd and can I get rid of it and use inetd like
> the rest of the world?
Man xinetd was sufficient for me last time. And yes, of course you can
use inetd instead.
> 2) is GNOME flakey or is it an artifact of something else and the window
> manager is suffering some problem of the OS?
I think gnome is flakey. My opinion only, of course. And it's no big
deal .. just don't flake.
> 3) After some digging, is it true that you can't use win2k with samba 2.0.7?
You mean passwds? I think that is roughly true. It's certainly
relatively hard because of encryption issues. You need the Samba HOWTO.
> 4) how can I turn the linux box (kind of a newbie here) into a domain server
> so I can allow network spaces for win2k clients and allow users to use the
> modem on the linux box?
domain server? What do you mean? Are you talking about samba? a winbios
name server? What is a "network space"? users should be able to log
into your machine just fine, or mount samba "shares", once you get
passwd issues sorted. Once logged in they can use the modem, but what
would the yuse it for? If you have a dialup conection, then gateway
the windows machines through the linux one and set it to dial on
demand.
> I have a project I would like to port to Linux. The project requirements are
> that the code runs without fail (nohup type stuff) and that if I decide to
> put a gui on it, that the gui can't freeze like I've witnessed GNOME do AND
> it has to be GPL...
Peter
------------------------------
From: Michael Young <michael&[EMAIL PROTECTED]>
Subject: lynx mouse support
Date: Sun, 22 Apr 2001 12:49:33 -0500
Hi all,
Anyone know where I can download a debian Lynx package for with libgpm
built in or walk me through comiling from source with gpm support?
I tried compile it myself and got nowhere.
Thanks in advance,
Michael Young
[EMAIL PROTECTED]
------------------------------
From: Peter Forsberg <[EMAIL PROTECTED]>
Crossposted-To: linux.redhat.install,linux.redhat
Subject: Re: RedHat 7.1 install hangs after selecting installation type
Date: Sun, 22 Apr 2001 20:01:53 +0200
Hi jtnews, thanks for replying.
> Do you get a list of all the packages
> to install after selecting Custom
> and pressing Next?
Nope. It hangs just milliseconds after I press Next, the screen does not
change a bit (except that it freezes of course).
I have also followed your instructions and found no errors in the rpm
checksums, all were reported OK. I ran the command against all rpm files
found on CD1.
Any other ideas anyone...?
Thanks,
Peter
jtnews wrote:
>
> Do you get a list of all the packages
> to install after selecting Custom
> and pressing Next?
>
> I used graphical mode and it worked fine.
>
> One problem I had was that some ftp
> sites have corrupted rpm's. So that
> the installation process would abort
> unexpectedly a short while after beginning
> to install packages.
>
> You can use
>
> gpg --import RPM-GPG-KEY
> rpm --checksig *.rpm
>
> to check all your rpms.
>
> Peter Forsberg wrote:
> >
> > Hi,
> > I'm trying to install 7.1 (final, not beta) by booting from CD1.
> > Everything moves along just fine until after I have selected
> > installation type (Custom) and pressed Next. At this point the CD light
> > goes on and everything else seems to hang, the machine freezes. Even
> > the mouse pointer does not move.
> >
> > I have tried different alternatives: graphical, non-graphical and expert
> > modes. I have also tried both Custom and Upgrade installation types, all
> > with the same result.
> >
> > I tried to disconnect my USB hub and all USB devices, but it made no
> > difference.
> >
> > I have previously installed several Redhat versions (5.0, 5.2, 6.0, 6.1
> > and 7.0) on the same machine without any problems.
> >
> > Has anyone else seen the same behavior, and hopefully resolved the
> > problem?
> >
> > Does anyone know what the install process does right after selecting
> > installation type? Maybe it could give a hint to what goes wrong.
> >
> > Thanks in advance for any help!
> >
> > (this was also posted to the seawolf mail list at Redhat, see
> > https://listman.redhat.com/mailman/listinfo/seawolf-list )
> >
> > Best regards,
> > Peter Forsberg
------------------------------
From: J Hayward <[EMAIL PROTECTED]>
Subject: Re: Building from the bottom up...
Crossposted-To: alt.linux,alt.os.linux,comp.os.linux.misc
Date: Sun, 22 Apr 2001 11:08:06 -0700
Hello Michael,
http://www.linuxfromscratch.com/
Regards,
Jim H
Michael Pye wrote:
> I've been experimenting with Redhat 7 for a little while now, but I am a
> very technically minded user and I am about to have a P100 drop off the
> bottom of my home network a new machine arrives and all the others are
> shunted down.
>
> So, I want to really get to know Linux and I can't think of a better way
> than to try and build a working system from the kernel up until it is
> suitable for use as a local web server with apache, mySQL, PHP and co.
>
> I'm looking for a little information before I start. Firstly, where to I
> begin. I will have a system with an empty hard disk. I will also have a
> machine connected to the net with floppies and a CD burner for
> transferring larger files to the new machine so there is not a problem
> there, but what do I start with?
>
> I assume I will need an x86 binary distribution of a very basic kernel,
> bash shell and ANSI compiler tools to actually make the system move (small
> / basic is beautiful, I will compile up to date ones from source when I
> have a basic system) as well as a boot disk with disk druid / fdisk (I
> don't mind as the system will be clean. Nothing there to mess up...) and a
> formatter.
>
> What have I missed? I have never tried this before and I am willing to put
> time in. I also consider myself a highly competent computer user, though
> not very experienced in Linux. The latter shouldn't matter, the point of
> the exercise is to gain experience whether it works in the end or not...
>
> Thanks in advance for help / hints. Rest assured you will hear from my
> again as I progress :)
>
> Cheers
>
> MP
>
>
>
------------------------------
From: "Larry Snyder" <[EMAIL PROTECTED]>
Crossposted-To: alt.comp.periphs.mainboard.asus,comp.os.linux.hardware
Subject: Promise RAID with RedHat 7.1/Mandrake 8.0
Date: Sun, 22 Apr 2001 14:16:48 -0400
Anyone get RedHat 7.2 and/or Mandrake 8.0 to work with the Promise RAID
conectroller that comes with the A7V133 motherboard in RAID 0?
If so, some pointers please!
Larry
------------------------------
From: "Carsten Cimander,,," <[EMAIL PROTECTED]>
Subject: Re: PPPd - I can't get it to compile into the kernel
Date: Sun, 22 Apr 2001 20:32:09 +0200
Hi,
I experienced the same problem.
/var/log/messages reports:
cannot open /dev/pppox0: No such device
or
Failed to open /dev/pppox0: No such device
Downloading the new beta-driver for kernel 2.4.x
resolved the problem. I use it on a SuSE 7.1 distribution (kernel 2.4.0).
I downloaded the two needed updates from:
ftp://ftp.suse.com/pub/people/bk/pppoe/ppp-2.4.0-5.i386.rpm
ftp://ftp.suse.com/pub/people/bk/pppoe/pppoed-0.48b1-6.i386.rpm
regards,
Carsten
> The subject says it, but here's a bit more detail.
> I need to compile a 2.4 kernel with PPP - I must be missing something
> because, whether I compile as a module or built-in, pppd gives an error.
>
> Anyone able/willing to help?
>
> Phil
>
>
------------------------------
From: "David Stuart" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking
Subject: Help needed with DHCP client setup (@home)
Date: Sun, 22 Apr 2001 18:57:36 GMT
Hi,
Because of @home's constant re-configurations of their networks, I've been
forced to switch from a manually configured IP address to using DHCP..
I've been able to get this to work under windows, but I have not been
successful under Linux. All I get is "dhcpcd timed out"... and my eth0
interface refuses to come up.
I've read the mini DHCP client HOW-TO, but this is impossible to understand.
I'm still relatively new to all of the DHCP terminology (what the heck is
bootp, and this thing called pump???). I don't want to setup a DHCP server,
most of the documentation I've found so far seems to centre around this.
If anyone could help me out by letting me know what exactly needs to be done
(step-by-step, explain as you would an idiot).. or could point me to
somewhere where this information could be found, I would be eternally
grateful! I don't want to become a DHCP expert, I just want to setup my
machine's connectivity..
I would especially be interested in speaking with someone who's successfully
got everything running with the rogers@home service in Ontario (but in a
pinch, anyone with knowledge will do)!
I'm currently running RedHat 7.0 / ix86 architecture..
Win98 was easy to setup for this, I don't see why Linux is proving to be
such a dog in this area...??
Dave
--
David Stuart: [EMAIL PROTECTED]
Web Page: http://www.turbomoose.com/~stimpy/
------------------------------
From: Dougie Richardson <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.hardware,comp.os.linux.misc,comp.os.linux.admin,comp.os.linux.help,comp.os.linux.redhat
Subject: Re: Interesting failure rebooting LINUX
Date: Sun, 22 Apr 2001 20:09:36 +0100
Salim Douba wrote:
> Hi,
>
> This is how the partition table looks like:
>
> Command (m for help): p
>
> Disk /dev/hda: 255 heads, 63 sectors, 524 cylinders
> Units = cylinders of 16065 * 512 bytes
>
> Device Boot Start End Blocks Id System
> /dev/hda1 * 1 181 1453851 83 Linux
> /dev/hda2 182 199 144585 82 Linux swap
> /dev/hda3 200 523 2602530 7 HPFS/NTFS
>
> Please note that the disk was intended for dual boot wint Windows NT.
> However, even when I tried LINUX only i had the same results.
>
> Salim
Where are you installing LILO during installation, target partition
(/dev/hda1) or MBR?
--
Dougie Richardson //================================
//
[EMAIL PROTECTED]
=================// http://www.incarnate.uklinux.net
------------------------------
From: The Flying Ape <[EMAIL PROTECTED]>
Subject: Re: Help needed with DHCP client setup (@home)
Crossposted-To: comp.os.linux.networking
Date: Sun, 22 Apr 2001 19:12:29 GMT
Red Hat includes a program, netconf, which should prompt you for DHCP or
STATIC. It is important that you sent your host name to the assigned node
name given to you by the @Home network provider, i.e., cx55675-b
You can also get to its netowrk configuration running 'setup' at a command
prompt.
If not successful, there are many online resources that discuss the DHCP
client, just do a Google search with a keyword like 'dhcpcd' (the Linux
DHCP client program).
Good luck!
------------------------------
From: "David Stuart" <[EMAIL PROTECTED]>
Subject: Re: Help needed with DHCP client setup (@home)
Date: Sun, 22 Apr 2001 19:23:31 GMT
Thanks,
I'll try netconf.. I did the Google thing for hours last night (that's how I
got all the confusing documentation which was telling me to edit scripts..
ick!). IMHO, this part of the configuration could use some work to make it
more user-friendly (of course, it's all part of solving the system-admin
problem)..
If you can think of anything else, let me know.. :)
Dave
"The Flying Ape" <[EMAIL PROTECTED]> wrote in message
news:x2GE6.4901$[EMAIL PROTECTED]...
> Red Hat includes a program, netconf, which should prompt you for DHCP or
> STATIC. It is important that you sent your host name to the assigned node
> name given to you by the @Home network provider, i.e., cx55675-b
>
> You can also get to its netowrk configuration running 'setup' at a command
> prompt.
>
> If not successful, there are many online resources that discuss the DHCP
> client, just do a Google search with a keyword like 'dhcpcd' (the Linux
> DHCP client program).
>
> Good luck!
>
------------------------------
From: "DCE" <[EMAIL PROTECTED]>
Subject: Re: Help needed with DHCP client setup (@home)
Date: Sun, 22 Apr 2001 19:32:21 GMT
In article <x2GE6.4901$[EMAIL PROTECTED]>, The Flying Ape
<[EMAIL PROTECTED]> wrote:
> Red Hat includes a program, netconf, which should prompt you for DHCP or
> STATIC. It is important that you sent your host name to the assigned
> node name given to you by the @Home network provider, i.e., cx55675-b
>
This is very important. Call dhcp with the -h switch (dchp -h cx55675-b) to assign
your @home host name
------------------------------
From: Dave Uhring <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,comp.os.linux.questions
Subject: Re: Partition questions...
Date: Sun, 22 Apr 2001 14:36:41 -0500
dmayo wrote:
> Halloo!
>
> I recently installed Red Hat Linux 7.0 on my laptop(233 MMX, 3GBHDD,
> 64MBRAM). It's up and running, and apart from the backspace and delete
> keys which I cannae figure how to fix... the rest is fine. However, I've
> started reading the Linux System Administration Guide (thanx to all of you
> who recommended me good books to read!!). I am a newbie, of course! I was
> reading on Partitions where it says that you could have more than one
> Primary Partition on your HDD. Is this really possible?
> I used MSDOS fdisk for making my partitions (expecting to get Partition
> Magic this week). I have the following
> Primary 35% (1GB)-where Windows 98 is sitting
> Extended 65% of which
> Logical 1 (d:) 50% (1GB) - used for data
> Logical 2 (e:) 50% - this one is now with Linux native (1GB)- no
> longer
> called e:
>
> The question is:
> Could I reduce (using Partition Magic, or fdisk) the size of logical 1 to
> say, half it's actual size in order to increase the space given to Linux?
> I have intentions of extending it's use. Gonnae get StarOffice soon
> too.... basically, I want to transform gradually my Microsoft PC into a
> Red Hat Linux machine. I am still learning at this stage.
>
> Ta very much!
>
> PD: If someone could help me with the backspace and delete keys...
> strongly appreaciated!!
>
> Dave Mayo
>
>
>
With that small drive, forget about installing StarOffice. I don't
remember what it takes in Linux, but in Solaris the /usr/local/office52
directory has 509342 bytes in it. Larger drives are available cheaply.
The backspace/delete key problem is fixed in several ways depending on
which terminal or console you are using. For instance, with xterm, hold
down the left Control key while depressing the left mouse button. You get
a menu; move the cursor to the Backarrow Key and release the mouse button.
For shrinking that e: drive in Windows, Partition Magick works without
destroying the data that is in it. Then you can use fdisk to add and type
the new partition for Linux. Then you will have to create a new fs on the
partition and add it to your /etc/fstab.
------------------------------
From: "B.Y." <[EMAIL PROTECTED]>
Subject: Re: Red Hat upgrade to 2.2.19 kernel -- help!
Date: 22 Apr 2001 19:46:58 GMT
Rasmus B�g Hansen <[EMAIL PROTECTED]> wrote:
: On 22 Apr 2001, B.Y. wrote:
:> Using rpm 4.0.2-6x, having upgraded mount and nfs-utils
:> [segfaults] The install works fine with rpm-3.0.5-9.6x
: Hmmm... I vaguely remember something about having to to do rpm
: --rebuilddb after the rpm upgrade. Have you upgraded to the lates rpm
: version from the updates?
Thanks for the tip; yup, that is what I forgotten and it now works.
rpm 3.0.5 would work also; if using rpm v4, you have to rpm --rebuilddb.
------------------------------
From: "Troy Jesse" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking
Subject: Re: Help needed with DHCP client setup (@home)
Date: Sun, 22 Apr 2001 14:52:03 -0500
I had a hard time configuring DHCP under redhat as well. I just installed
Mandrake 8.0, and my @Home works with DHCP very easily.
Troy
"David Stuart" <[EMAIL PROTECTED]> wrote in message
news:AQFE6.83351$[EMAIL PROTECTED]...
> Hi,
>
> Because of @home's constant re-configurations of their networks, I've been
> forced to switch from a manually configured IP address to using DHCP..
>
> I've been able to get this to work under windows, but I have not been
> successful under Linux. All I get is "dhcpcd timed out"... and my eth0
> interface refuses to come up.
>
> I've read the mini DHCP client HOW-TO, but this is impossible to
understand.
> I'm still relatively new to all of the DHCP terminology (what the heck is
> bootp, and this thing called pump???). I don't want to setup a DHCP
server,
> most of the documentation I've found so far seems to centre around this.
>
> If anyone could help me out by letting me know what exactly needs to be
done
> (step-by-step, explain as you would an idiot).. or could point me to
> somewhere where this information could be found, I would be eternally
> grateful! I don't want to become a DHCP expert, I just want to setup my
> machine's connectivity..
>
> I would especially be interested in speaking with someone who's
successfully
> got everything running with the rogers@home service in Ontario (but in a
> pinch, anyone with knowledge will do)!
>
> I'm currently running RedHat 7.0 / ix86 architecture..
>
> Win98 was easy to setup for this, I don't see why Linux is proving to be
> such a dog in this area...??
>
> Dave
> --
> David Stuart: [EMAIL PROTECTED]
> Web Page: http://www.turbomoose.com/~stimpy/
>
>
>
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list by posting to comp.os.linux.setup.
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
