Hi Gerhard,
On Sun, Feb 02, 2014 at 03:31:48PM +0100, Gerhard Sittig wrote:
> On Sun, Feb 02, 2014 at 15:32 +0200, Baruch Siach wrote:
> > On Sun, Feb 02, 2014 at 01:49:41PM +0100, Gerhard Sittig wrote:
> > > On Fri, Jan 31, 2014 at 12:07 +0200, Baruch Siach wrote:
> > > > Unfortunately, I probably have no chance access to thest this series on
> > > > hardware, I's only compile tested. So I'm sending this as RFC for code
> > > > review.
> > > > If this series doesn't get merged, it may be used at least as a
> > > > starting point
> > > > for someone with hardware access.
> > >
> > > Which repo and branch is the code based on? I can't apply it
> > > here, neither to v3.13 nor torvald's master nor broonie's
> > > topic/dw nor broonie's for-next.
> >
> > This sereis is based on the topic/dw branch as of 6d3a38819. Mark has
> > applied
> > patch no. 5 from this series to topic/dw. Is this the cause of your problem?
>
> I was looking into how I could test the GPIO based chip select
> support. Unfortunately I don't have much hardware around either,
> it turned out that none of the available boards allow me to run
> mainline kernels and access the signals or connect more slaves.
> So I'm sorry but cannot help beyond review either. :(
Just curious, what hardware do you have with DesignWare SPI master?
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- [email protected] - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
