Hi,
On 01/23/2014 11:39 PM, Hans de Goede wrote:
Hi,
I've been working on updating sunxi-devel to include more
recent versions if your gmac patches, as well as adding support
for the wifi + bluetooth found on the cubietruck.
Here is my current work on this:
https://github.com/jwrdegoede/linux-sunxi/commits/sunxi-devel
It is close to working, but unfortunately it does not work,
here is what I get in dmesg when I modprove the module:
[ 99.700889] brcmfmac_sdio mmc1:0001:1: device tree node not found
[ 100.020984] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22
2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 100.260948] brcmfmac: brcmf_fil_cmd_data: Failed err=-23
[ 100.281260] brcmfmac: brcmf_fil_cmd_data: Failed err=-23
[ 100.322508] usbcore: registered new interface driver brcmfmac
[ 160.445215] brcmfmac: brcmf_cfg80211_sched_scan_start: Scanning already:
status (1)
[ 203.445404] brcmfmac: brcmf_cfg80211_sched_scan_start: Scanning already:
status (1)
[ 256.445140] brcmfmac: brcmf_cfg80211_sched_scan_start: Scanning already:
status (1)
...
This is using the firmware + nvram found here:
http://dl.cubieboard.org/public/Cubieboard/benn/firmware/ap6210/
Wens' can you give my tree a try? And which version of the firmware +
nvram are you using ?
Quick update, I've just tested:
https://github.com/wens/linux/commits/wip/sunxi-next-wifi
And the result is the same. So wrong firmware / nvram ?
I've used:
http://dl.cubieboard.org/public/Cubieboard/benn/firmware/ap6210/fw_bcm40181a2.bin
http://dl.cubieboard.org/public/Cubieboard/benn/firmware/ap6210/nvram_ap6210.txt
Regards,
Hans
p.s.
About the oob interrupt stuff not working, AFAIK you should set a pinctrl
function (not input, but a function like mmc is a function) on the pin in
question
for it to work as external interrupt, I believe you're not doing so in your dts.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
