Hi.
Running linux-sunxi kernel 3.4.103 as provided by Arch Linux ARM I'm
facing something similar - Cubietruck reboots instead of powering down
the last lines on the serial console saying
[ 1462.296272] [sw-ehci1]: shutdown end
wrn: hcd is disable, need not shutdown
[ 1462.303373] wrn: hcd is disable, need not shutdown
[NAND]shutdown
[ 1462.309626] [NAND]shutdown
nand try to shutdown 0 time
[ 1462.314853] nand try to shutdown 0 time
Nand flash shutdown ok!
[ 1462.320874] Nand flash shutdown ok!
<0>Power down.
[ 1462.325779] Power down.
<6>[hotplug]: cpu(0) try to kill cpu(1)
[ 1462.331792] [hotplug]: cpu(0) try to kill cpu(1)
<3>[hotplug]: try to kill cpu:1 failed!
[ 1463.353891] [hotplug]: try to kill cpu:1 failed!
[axp] send power-off command!
[ 1463.362793] [axp] send power-off command!
[axp] set flag!
[ 1463.388741] [axp] set flag!
[axp] reboot!
[ 1463.413022] [axp] reboot!
If I'm not mistaken all config options regarding AXP in the used .config
are the same as when running 'make [...] sun7i_defconfig' in linux-sunxi
kernel's upstream source tree. Any ideas how to fix this?
Thanks in advance,
regards
Peter Mattern
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
