On Monday, January 19, 2015 15:44:24 Peter Mattern wrote: > Hi. > > Running linux-sunxi kernel 3.4.103 as provided by Arch Linux ARM I'm > facing something similar - Cubietruck reboots instead of powering down > the last lines on the serial console saying > [ 1462.296272] [sw-ehci1]: shutdown end > wrn: hcd is disable, need not shutdown > [ 1462.303373] wrn: hcd is disable, need not shutdown > [NAND]shutdown > [ 1462.309626] [NAND]shutdown > nand try to shutdown 0 time > [ 1462.314853] nand try to shutdown 0 time > Nand flash shutdown ok! > [ 1462.320874] Nand flash shutdown ok! > <0>Power down. > [ 1462.325779] Power down. > <6>[hotplug]: cpu(0) try to kill cpu(1) > [ 1462.331792] [hotplug]: cpu(0) try to kill cpu(1) > <3>[hotplug]: try to kill cpu:1 failed! > [ 1463.353891] [hotplug]: try to kill cpu:1 failed! > [axp] send power-off command! > [ 1463.362793] [axp] send power-off command! > [axp] set flag! > [ 1463.388741] [axp] set flag! > [axp] reboot! > [ 1463.413022] [axp] reboot! > > If I'm not mistaken all config options regarding AXP in the used .config > are the same as when running 'make [...] sun7i_defconfig' in linux-sunxi > kernel's upstream source tree. Any ideas how to fix this?
See https://github.com/linux-sunxi/sunxi-boards/commit/6beac1f2b8ed65d7dee5d95b84ca27e29a5a475c. Regards, Lars -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
