Hi, I have an A33 powered tablet (10" PendoPad) and I'm trying to get it to boot from SD card. I'd like to change this Android box into a Linux box.
I'm using the latest U-Boot with settings from the A33 configs that are supplied. I have a monitor connected to the UART0 pins on the board and can see the boot0/boot1 output when the tablet boots from NAND. But when I try to boot from SD card all I see are strings of jibberish (e.g. "2666&& "). I've tried monitoring at different baud rates. I realise that U-Boot won't get very far because probably many other settings are wrong for the hardware. But I thought I would be able to at least get some sensible output on UART0. I'm writing u-boot-sunxi-with-spl to offset 8kB in the SD card. Is this correct for the A33 ? Does anybody have any suggestions I can try ? Thanks, Steven -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
