On Thu, May 21, 2026 at 02:46:54AM +0000, Wei Yang wrote:
> On Thu, May 21, 2026 at 10:36:15AM +0800, Vernon Yang wrote:
> >On Mon, May 11, 2026 at 12:58:11PM -0600, Nico Pache wrote:
> >> Enable khugepaged to collapse to mTHP orders. This patch implements the
> >> main scanning logic using a bitmap to track occupied pages and a stack
> >> structure that allows us to find optimal collapse sizes.
> >>
> >> Previous to this patch, PMD collapse had 3 main phases, a light weight
> >> scanning phase (mmap_read_lock) that determines a potential PMD
> >> collapse, an alloc phase (mmap unlocked), then finally heavier collapse
> >> phase (mmap_write_lock).
> >>
> >> To enabled mTHP collapse we make the following changes:
> >>
> >> During PMD scan phase, track occupied pages in a bitmap. When mTHP
> >> orders are enabled, we remove the restriction of max_ptes_none during the
> >> scan phase to avoid missing potential mTHP collapse candidates. Once we
> >> have scanned the full PMD range and updated the bitmap to track occupied
> >> pages, we use the bitmap to find the optimal mTHP size.
> >>
> >> Implement collapse_scan_bitmap() to perform binary recursion on the bitmap
> >> and determine the best eligible order for the collapse. A stack structure
> >> is used instead of traditional recursion to manage the search. This also
> >> prevents a traditional recursive approach when the kernel stack struct is
> >> limited. The algorithm recursively splits the bitmap into smaller chunks to
> >> find the highest order mTHPs that satisfy the collapse criteria. We start
> >> by attempting the PMD order, then moved on the consecutively lower orders
> >> (mTHP collapse). The stack maintains a pair of variables (offset, order),
> >> indicating the number of PTEs from the start of the PMD, and the order of
> >> the potential collapse candidate.
> >>
> >> The algorithm for consuming the bitmap works as such:
> >> 1) push (0, HPAGE_PMD_ORDER) onto the stack
> >> 2) pop the stack
> >> 3) check if the number of set bits in that (offset,order) pair
> >> statisfy the max_ptes_none threshold for that order
> >> 4) if yes, attempt collapse
> >> 5) if no (or collapse fails), push two new stack items representing
> >> the left and right halves of the current bitmap range, at the
> >> next lower order
> >> 6) repeat at step (2) until stack is empty.
> >>
> >> Below is a diagram representing the algorithm and stack items:
> >>
> >> offset mid_offset
> >> | |
> >> | |
> >> v v
> >> ____________________________________
> >> | PTE Page Table |
> >> --------------------------------------
> >> <-------><------->
> >> order-1 order-1
> >>
> >> mTHP collapses reject regions containing swapped out or shared pages.
> >> This is because adding new entries can lead to new none pages, and these
> >> may lead to constant promotion into a higher order mTHP. A similar
> >> issue can occur with "max_ptes_none > HPAGE_PMD_NR/2" due to a collapse
> >> introducing at least 2x the number of pages, and on a future scan will
> >> satisfy the promotion condition once again. This issue is prevented via
> >> the collapse_max_ptes_none() function which imposes the max_ptes_none
> >> restrictions above.
> >>
> >> We currently only support mTHP collapse for max_ptes_none values of 0
> >> and HPAGE_PMD_NR - 1. resulting in the following behavior:
> >>
> >> - max_ptes_none=0: Never introduce new empty pages during collapse
> >> - max_ptes_none=HPAGE_PMD_NR-1: Always try collapse to the highest
> >> available mTHP order
> >>
> >> Any other max_ptes_none value will emit a warning and skip mTHP collapse
> >> attempts. There should be no behavior change for PMD collapse.
> >>
> >> Once we determine what mTHP sizes fits best in that PMD range a collapse
> >> is attempted. A minimum collapse order of 2 is used as this is the lowest
> >> order supported by anon memory as defined by THP_ORDERS_ALL_ANON.
> >>
> >> Currently madv_collapse is not supported and will only attempt PMD
> >> collapse.
> >>
> >> We can also remove the check for is_khugepaged inside the PMD scan as
> >> the collapse_max_ptes_none() function handles this logic now.
> >>
> >> Signed-off-by: Nico Pache <[email protected]>
> >> ---
> >> mm/khugepaged.c | 182 +++++++++++++++++++++++++++++++++++++++++++++---
> >> 1 file changed, 174 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> >> index 3492b135d667..39bf7ea8a6e8 100644
> >> --- a/mm/khugepaged.c
> >> +++ b/mm/khugepaged.c
> >> @@ -100,6 +100,30 @@ static DEFINE_READ_MOSTLY_HASHTABLE(mm_slots_hash,
> >> MM_SLOTS_HASH_BITS);
> >>
> >> static struct kmem_cache *mm_slot_cache __ro_after_init;
> >>
> >> +#define KHUGEPAGED_MIN_MTHP_ORDER 2
> >> +/*
> >> + * mthp_collapse() does an iterative DFS over a binary tree, from
> >> + * HPAGE_PMD_ORDER down to KHUGEPAGED_MIN_MTHP_ORDER. The max stack
> >> + * size needed for a DFS on a binary tree is height + 1, where
> >> + * height = HPAGE_PMD_ORDER - KHUGEPAGED_MIN_MTHP_ORDER.
> >> + *
> >> + * ilog2 is used in place of HPAGE_PMD_ORDER because some architectures
> >> + * (e.g. ppc64le) do not define HPAGE_PMD_ORDER until after build time.
> >> + */
> >> +#define MTHP_STACK_SIZE (ilog2(MAX_PTRS_PER_PTE) -
> >> KHUGEPAGED_MIN_MTHP_ORDER + 1)
> >> +
> >> +/*
> >> + * Defines a range of PTE entries in a PTE page table which are being
> >> + * considered for mTHP collapse.
> >> + *
> >> + * @offset: the offset of the first PTE entry in a PMD range.
> >> + * @order: the order of the PTE entries being considered for collapse.
> >> + */
> >> +struct mthp_range {
> >> + u16 offset;
> >> + u8 order;
> >> +};
> >> +
> >> struct collapse_control {
> >> bool is_khugepaged;
> >>
> >> @@ -111,6 +135,12 @@ struct collapse_control {
> >>
> >> /* nodemask for allocation fallback */
> >> nodemask_t alloc_nmask;
> >> +
> >> + /* Each bit represents a single occupied (!none/zero) page. */
> >> + DECLARE_BITMAP(mthp_bitmap, MAX_PTRS_PER_PTE);
> >> + /* A mask of the current range being considered for mTHP collapse. */
> >> + DECLARE_BITMAP(mthp_bitmap_mask, MAX_PTRS_PER_PTE);
> >> + struct mthp_range mthp_bitmap_stack[MTHP_STACK_SIZE];
> >> };
> >>
> >> /**
> >> @@ -1404,20 +1434,140 @@ static enum scan_result collapse_huge_page(struct
> >> mm_struct *mm, unsigned long s
> >> return result;
> >> }
> >>
> >> +static void collapse_mthp_stack_push(struct collapse_control *cc, int
> >> *stack_size,
> >> + u16 offset, u8 order)
> >> +{
> >> + const int size = *stack_size;
> >> + struct mthp_range *stack = &cc->mthp_bitmap_stack[size];
> >> +
> >> + VM_WARN_ON_ONCE(size >= MTHP_STACK_SIZE);
> >> + stack->order = order;
> >> + stack->offset = offset;
> >> + (*stack_size)++;
> >> +}
> >> +
> >> +static struct mthp_range collapse_mthp_stack_pop(struct collapse_control
> >> *cc,
> >> + int *stack_size)
> >> +{
> >> + const int size = *stack_size;
> >> +
> >> + VM_WARN_ON_ONCE(size <= 0);
> >> + (*stack_size)--;
> >> + return cc->mthp_bitmap_stack[size - 1];
> >> +}
> >> +
> >> +static unsigned int collapse_mthp_count_present(struct collapse_control
> >> *cc,
> >> + u16 offset, unsigned int
> >> nr_ptes)
> >> +{
> >> + bitmap_zero(cc->mthp_bitmap_mask, MAX_PTRS_PER_PTE);
> >> + bitmap_set(cc->mthp_bitmap_mask, offset, nr_ptes);
> >> + return bitmap_weight_and(cc->mthp_bitmap, cc->mthp_bitmap_mask,
> >> MAX_PTRS_PER_PTE);
> >> +}
> >> +
> >> +/*
> >> + * mthp_collapse() consumes the bitmap that is generated during
> >> + * collapse_scan_pmd() to determine what regions and mTHP orders fit best.
> >> + *
> >> + * Each bit in cc->mthp_bitmap represents a single occupied (!none/zero)
> >> page.
> >> + * A stack structure cc->mthp_bitmap_stack is used to check different
> >> regions
> >> + * of the bitmap for collapse eligibility. The stack maintains a pair of
> >> + * variables (offset, order), indicating the number of PTEs from the
> >> start of
> >> + * the PMD, and the order of the potential collapse candidate
> >> respectively. We
> >> + * start at the PMD order and check if it is eligible for collapse; if
> >> not, we
> >> + * add two entries to the stack at a lower order to represent the left
> >> and right
> >> + * halves of the PTE page table we are examining.
> >> + *
> >> + * offset mid_offset
> >> + * | |
> >> + * | |
> >> + * v v
> >> + * --------------------------------------
> >> + * | cc->mthp_bitmap |
> >> + * --------------------------------------
> >> + * <-------><------->
> >> + * order-1 order-1
> >> + *
> >> + * For each of these, we determine how many PTE entries are occupied in
> >> the
> >> + * range of PTE entries we propose to collapse, then we compare this to a
> >> + * threshold number of PTE entries which would need to be occupied for a
> >> + * collapse to be permitted at that order (accounting for max_ptes_none).
> >> + *
> >> + * If a collapse is permitted, we attempt to collapse the PTE range into a
> >> + * mTHP.
> >> + */
> >> +static int mthp_collapse(struct mm_struct *mm, unsigned long address,
> >> + int referenced, int unmapped, struct collapse_control *cc,
> >> + unsigned long enabled_orders)
> >> +{
> >> + unsigned int nr_occupied_ptes, nr_ptes;
> >> + int max_ptes_none, collapsed = 0, stack_size = 0;
> >> + unsigned long collapse_address;
> >> + struct mthp_range range;
> >> + u16 offset;
> >> + u8 order;
> >> +
> >> + collapse_mthp_stack_push(cc, &stack_size, 0, HPAGE_PMD_ORDER);
> >> +
> >> + while (stack_size) {
> >> + range = collapse_mthp_stack_pop(cc, &stack_size);
> >> + order = range.order;
> >> + offset = range.offset;
> >> + nr_ptes = 1UL << order;
> >> +
> >> + if (!test_bit(order, &enabled_orders))
> >> + goto next_order;
> >> +
> >> + max_ptes_none = collapse_max_ptes_none(cc, NULL, order);
> >> +
> >> + if (max_ptes_none < 0)
> >> + return collapsed;
> >> +
> >> + nr_occupied_ptes = collapse_mthp_count_present(cc, offset,
> >> + nr_ptes);
> >> +
> >> + if (nr_occupied_ptes >= nr_ptes - max_ptes_none) {
> >> + int ret;
> >> +
> >> + collapse_address = address + offset * PAGE_SIZE;
> >> + ret = collapse_huge_page(mm, collapse_address,
> >> referenced,
> >> + unmapped, cc, order);
> >> + if (ret == SCAN_SUCCEED) {
> >> + collapsed += nr_ptes;
> >> + continue;
> >> + }
> >> + }
> >> +
> >> +next_order:
> >> + if (order > KHUGEPAGED_MIN_MTHP_ORDER) {
> >
> >Hi Nico, thank you very much for your contributions to this series.
> >
> >I found a minor issue, for MADV_COLLAPSE, if collapse_huge_page() fails
> >for some reason (e.g. allocate folio), it goes to next_order and
> >continues splitting to the next small order. However, enabled_orders
> >only supports HPAGE_PMD_ORDER, so it keeps runing the split operations
> >without any effective work until KHUGEPAGED_MIN_MTHP_ORDER is reached
> >before exiting. For khugepaged, e.g. setting only 2MB to always, also
> >same phenomenon.
>
> Yes, but it does no actual work since it is checked after pop up.
>
> >
> >This does not affect the overall functionality of mthp collapse, just
> >redundant.
> >
> >The redundant operations can be easily skipped with the following
> >modification. If I miss some thing, please let me know. Thanks!
> >
> >diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> >index 1a25af3d6d0f..fa407cce525c 100644
> >--- a/mm/khugepaged.c
> >+++ b/mm/khugepaged.c
> >@@ -1574,7 +1574,7 @@ static int mthp_collapse(struct mm_struct *mm,
> >unsigned long address,
> > }
> >
> > next_order:
> >- if (order > KHUGEPAGED_MIN_MTHP_ORDER) {
> >+ if ((BIT(order) - 1) & enabled_orders) {
> > const u8 next_order = order - 1;
> > const u16 mid_offset = offset + (nr_ptes / 2);
> >
>
> This would stop the iteration if there are other lower enabled order, right?
^^^^ ^^^^^^^^^^^^^^^^^^^
NO :)
For more details, please refer to the following information.
| Scenario | Old Behavior (order > 2) | New Behavior
((BIT(order)-1) & enabled_orders) |
|-------------------------------------|--------------------------|------------------------------------------------|
| MADV_COLLAPSE | Splits 9,8,7,...,3 | No split
|
| khugepaged, only 2MB enabled | Splits 9,8,7,...,3 | No split
|
| khugepaged, only 2MB + 64KB enabled | Splits 9,8,7,...,3 | Splits
9,8,7,...,5 |
| khugepaged, only 32KB enabled | Splits 9,8,7,...,3 | Splits
9,8,7,...,4 |
| khugepaged, only 16KB enabled | Splits 9,8,7,...,3 | Splits
9,8,7,...,3 |
| khugepaged, all mTHP enabled | Splits 9,8,7,...,3 | Splits
9,8,7,...,3 |
--
Cheers,
Vernon
