This series picks up the spi-hid driver work originally started by Microsoft. The patch breakdown has been modified and the implementation has been refactored to address upstream feedback and testing issues. We are submitting this as a new series while keeping the original sign-off chain to reflect the history.
Same as the original series, there is a change to HID documentation, some HID core changes to support a SPI device, the SPI HID transport driver, and HID over SPI Device Tree binding. We have added the HID over SPI ACPI support, power management, panel follower, and quirks for Ilitek touch controllers. Original authors: Jarrett Schultz <[email protected]>, Dmitry Antipov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jingyuan Liang <[email protected]> --- Changes in v6: - Take output_lock while reallocating buffers in ll_start() - Don't drop input reports while a refreshed device probes - OF: drop mod_devicetable.h, use named initializers, fix alignment - Move the dt-bindings patch before the OF driver patch - Drop Tested-by from the documentation and DT binding patches - Link to v5: https://lore.kernel.org/r/[email protected] Changes in v5: - Fix request/response races; match GET_FEATURE responses by report ID - Reset the device on response timeout; wait uninterruptibly - Validate device descriptor and report lengths; fix buffer sizing - Honor rtype in raw_request(); fix GET_REPORT off-by-one - Use hid_safe_input_report(); forward input reports only while open - Disable IRQ around hid_device teardown; fix a sparse warning - Use disable_work_sync() for reset_work in remove() - Cap trace copies at 64 bytes; cacheline-align read approval buffers - ACPI: select RESET_CONTROLLER, use device_reset_optional() - OF & DT: read opcodes as u8, use dev_err_probe(), require reg - PM: cancel reset_work on suspend, wait for reset before reset_resume(), fix IRQ imbalance on resume failure - Panel follower: fix regulator/IRQ imbalance; depend on DRM || !DRM - Link to v4: https://lore.kernel.org/r/[email protected] Changes in v4: - Extended io_lock scope to protect the shid->hid pointer lifecycle against races with the IRQ handler - Cacheline-aligned DMA buffers, enforced 4-byte alignment - Added error rollback for failed suspend/resume transitions - Moved IRQ request to probe with IRQF_NO_AUTOEN (disabled by default) - DT Bindings & OF Driver: - Required a device-specific compatible string in the schema. - Added description to explain why opcodes and addresses properties need to be defined in the schema - Added `spi-peripheral-props.yaml` reference and switched to `unevaluatedProperties: false`. - Added fallback to default timing parameters in OF driver if match data is missing. - Link to v3: https://lore.kernel.org/r/[email protected] Changes in v3: - Add io_lock init - Relocate tracepoints to drivers/hid/spi-hid/ and fix tracepoint macros - Add tracepoints for sync, error handling, reset, and report processing - Clean up internal includes and fix Makefile CFLAGS - Add more details in v2 changelog - Link to v2: https://lore.kernel.org/r/[email protected] Changes in v2: - Clean up DT bindings: fix formatting and remove timing and flags properties - Update DT binding example: use a device-specific compatible and drop reset_assert - Simplify ACPI/OF match tables by removing ACPI_PTR/of_match_ptr - Refactor OF driver to use match data for timing parameters instead of DT properties - Switch to fsleep() for delays in ACPI and OF drivers - Drop patch 12 as it is vendor specific - Add a lock to fix input/output concurrency race - Link to v1: https://lore.kernel.org/r/[email protected] --- Angela Czubak (2): HID: spi-hid: add transport driver skeleton for HID over SPI bus HID: spi-hid: add ACPI support for HID over SPI Jarrett Schultz (3): Documentation: Correction in HID output_report callback description. HID: Add BUS_SPI support and define HID_SPI_DEVICE macro HID: spi-hid: add device tree support for HID over SPI Jingyuan Liang (6): HID: spi-hid: add spi-hid driver HID layer HID: spi-hid: add HID SPI protocol implementation HID: spi-hid: add spi_hid traces dt-bindings: input: Document hid-over-spi DT schema HID: spi-hid: add power management implementation HID: spi-hid: add panel follower support .../devicetree/bindings/input/hid-over-spi.yaml | 130 ++ Documentation/hid/hid-transport.rst | 4 +- drivers/hid/Kconfig | 2 + drivers/hid/Makefile | 2 + drivers/hid/hid-core.c | 3 + drivers/hid/spi-hid/Kconfig | 50 + drivers/hid/spi-hid/Makefile | 12 + drivers/hid/spi-hid/spi-hid-acpi.c | 262 +++ drivers/hid/spi-hid/spi-hid-core.c | 1757 ++++++++++++++++++++ drivers/hid/spi-hid/spi-hid-core.h | 118 ++ drivers/hid/spi-hid/spi-hid-of.c | 242 +++ drivers/hid/spi-hid/spi-hid-trace.h | 184 ++ drivers/hid/spi-hid/spi-hid.h | 46 + include/linux/hid.h | 2 + 14 files changed, 2812 insertions(+), 2 deletions(-) --- base-commit: ee9c669f9bf5fd2c24206746ded9382fe810df89 change-id: 20260212-send-upstream-75f6fd9ed92e Best regards, -- Jingyuan Liang <[email protected]>
