From: Wei Li <[email protected]> The "X" value of the enable file and the "*" marker of the reactors file are undocumented. Document both in the monitors section.
Signed-off-by: Wei Li <[email protected]> --- Documentation/trace/rv/runtime-verification.rst | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst index c700dde9259c..0d9edb687836 100644 --- a/Documentation/trace/rv/runtime-verification.rst +++ b/Documentation/trace/rv/runtime-verification.rst @@ -210,12 +210,16 @@ For example:: - Writing "0" disables the *MONITOR* - Writing "1" enables the *MONITOR* -- Reading return the current status of the *MONITOR* +- Reading returns "0" if the *MONITOR* is disabled, and "1" if it is + enabled. For a container, "X" is returned when only some of its + nested monitors are enabled. **monitors/MONITOR/reactors** - List available reactors, with the select reaction for the given *MONITOR* inside "[]". The default one is the nop (no operation) reactor. +- A "*" after the selected reactor of a container indicates that some + nested monitors use a different reactor. - Writing the name of a reactor enables it to the given MONITOR. For example:: -- 2.55.0
