Henning,

  You are absolutely correct, I did cut one line too few.  The lines
  are identical.

  Indeed, the entire descriptor info for each, including no serial
  number, is identical.

++doug

from the keyboard of Henning Meier-Geinitz:
> Hi,
>
> On Thu, Sep 11, 2003 at 12:32:26PM -0500, Doug Maxey wrote:
> >   # head -20 fd-*
> >   ==> fd-first <==
> >   T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
> >   D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> >   P:  Vendor=0644 ProdID=0000 Rev= 0.00
> >   S:  Manufacturer=TEAC
> >   S:  Product=TEAC FD-05PUB
> >   C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
> >   I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=04 Prot=00 Driver=(none)
> >   E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> >   E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> >
> >   ==> fd-second <==
> >   T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
> >   D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> >   P:  Vendor=0644 ProdID=0000 Rev= 0.00
> >   S:  Manufacturer=TEAC
> >   S:  Product=TEAC FD-05PUB
> >   C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
> >   I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=04 Prot=00 Driver=usb-storage
> >   E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> >   E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> >   E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> >
> >   Just noticed that 1:3 shows three endpoints, 2:3 shows only two.
>
> Are you sure that you haven't missed the last line? The I: line says 3
> endpoints in both cases.
>
> Bye,
>   Henning
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
>


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to