On Wednesday 28 January 2004 17:56, Greg KH wrote:
>On Wed, Jan 28, 2004 at 08:02:42AM -0500, Gene Heskett wrote:
>> Comments?
>
>On what?  The driver loaded successfully.  But do you really have a
>pl2303 device plugged in?  The log messages do not show that.
>
>greg k-h

Yes, its plugged in, and the tally leds on the rs232 sniffer come 
alive during the boot process.  I was under the impression that what 
I included was the output of the detection process?  But let me look 
some more.  This must be what you were looking for, but didn't see, 
its a bit further down the dmesg file:
---
hub 3-2:1.0: new USB device on port 3, assigned address 4
drivers/usb/serial/usb-serial.c: descriptor matches
drivers/usb/serial/usb-serial.c: found interrupt in
drivers/usb/serial/usb-serial.c: found bulk out
drivers/usb/serial/usb-serial.c: found bulk in
pl2303 3-2.3:1.0: PL-2303 converter detected
drivers/usb/serial/usb-serial.c: get_free_serial 1
drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port 
structures for this device
drivers/usb/serial/usb-serial.c: usb_serial_probe - registering 
ttyUSB0
usb 3-2.3: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for 
devfs)
---
However, this is now a 2.6.2-rc2-mm1 boot, but that makes no changes 
to the messages I'd included before.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty: soap,
ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to