On Wed, Jan 28, 2004 at 09:47:11PM -0500, Gene Heskett wrote: > --- > hub 3-2:1.0: new USB device on port 3, assigned address 4 > drivers/usb/serial/usb-serial.c: descriptor matches > drivers/usb/serial/usb-serial.c: found interrupt in > drivers/usb/serial/usb-serial.c: found bulk out > drivers/usb/serial/usb-serial.c: found bulk in > pl2303 3-2.3:1.0: PL-2303 converter detected > drivers/usb/serial/usb-serial.c: get_free_serial 1 > drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 > drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures for > this device > drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 > usb 3-2.3: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) > --- > However, this is now a 2.6.2-rc2-mm1 boot, but that makes no changes > to the messages I'd included before.
Looks correct. And you are saying that using the ttyUSB0 device does not work for you? greg k-h ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
