On Thu, 26 Feb 2004 09:02:20 -0800 David Brownell <[EMAIL PROTECTED]> wrote:
> Looks like whoever built your VT6202 based card may > have wired it up strangely ... and in such a way that > it generates bogus overcurrent reports. If there's > a workaround in software, we'd need to see the > additional diagnostic messages that come from building > a (more recent) kernel with CONFIG_USB_DEBUG. Hello again! I just installed kernel 2.6.3 (from the source, not the RPM from Fedora). I enabled CONFIG_USB_DEBUG. I tried pluggin in my Webcam and then I get this in dmesg: .... ehci_hcd 0000:00:0d.2: GetStatus port 1 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 1 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 2 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 2 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 3 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 3 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 4 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 4 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 1 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 1 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 2 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 2 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 3 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 3 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 4 status 001020 POWER sig=se0 OCC hub 1-0:1.0: over-current change on port 4 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 1 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 1 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 2 status 001030 POWER sig=se0 OCC OC hub 1-0:1.0: over-current change on port 2 hub 1-0:1.0: enabling power on all ports ehci_hcd 0000:00:0d.2: GetStatus port 3 status 001020 POWER sig=se0 OCC hub 1-0:1.0: over-current change on port 3 hub 1-0:1.0: enabling power on all ports ... which continues forever and ever. Can anybody help me? This is very strange and annoying! Anders Misfeldt ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
