On Sun, 14 Mar 2004, Anders Misfeldt wrote: > On Sun, 14 Mar 2004 16:43:19 +0100 > Anders Misfeldt <[EMAIL PROTECTED]> wrote: > > > ehci_hcd 0000:00:0d.2: GetStatus port 1 status 001030 POWER sig=se0 OCC OC > > hub 1-0:1.0: over-current change on port 1 > > hub 1-0:1.0: enabling power on all ports > > ehci_hcd 0000:00:0d.2: GetStatus port 2 status 001030 POWER sig=se0 OCC OC > > hub 1-0:1.0: over-current change on port 2 > > hub 1-0:1.0: enabling power on all ports > > ehci_hcd 0000:00:0d.2: GetStatus port 3 status 001030 POWER sig=se0 OCC OC > > hub 1-0:1.0: over-current change on port 3 > > hub 1-0:1.0: enabling power on all ports > > ehci_hcd 0000:00:0d.2: GetStatus port 4 status 001030 POWER sig=se0 OCC OC > > hub 1-0:1.0: over-current change on port 4 > > hub 1-0:1.0: enabling power on all ports > > ehci_hcd 0000:00:0d.2: GetStatus port 1 status 001030 POWER sig=se0 OCC OC > > hub 1-0:1.0: over-current change on port 1 > > hub 1-0:1.0: enabling power on all ports > > I found out something, that might help (I don't know). When I plug my > camera into the USB2.0 port I get the above messages in dmesg. But not > all of them are related to the 0000:00:0d.2 address (the EHCI card). > Some are related to 0000:00:0d.1 which is the UHCI part of the same > card. There's only 2 ports on the card, but it keeps teeling me (when > you insert the ehci-hcd module) that there're 4 ports. > > Does this mean anything? Is my USB-controller broken or is it my webcam > that's broken?
Is it possible that this has something to do with the recent UHCI update adding overcurrent checking into the root hub code? Maybe the companion controller is somehow getting confused. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
