I have a 4 port usb card with the chip: VIA VT6202 Ver. 8.0. With 2.6.6 just one Port works with it. When i connect a usb device to the working port following error appears: hub 4-0:1.0: USB hub found hub 4-0:1.0: 4 ports detected hub 4-0:1.0: over-current change on port 3 hub 4-0:1.0: over-current change on port 4 ehci_hcd 0000:00:0c.2: port 4 reset error -110 hub 4-0:1.0: hub_port_status failed (err = -32) ehci_hcd 0000:00:0c.2: port 4 reset error -110 hub 4-0:1.0: hub_port_status failed (err = -32) ehci_hcd 0000:00:0c.2: port 4 reset error -110 hub 4-0:1.0: hub_port_status failed (err = -32) ehci_hcd 0000:00:0c.2: port 4 reset error -110 hub 4-0:1.0: hub_port_status failed (err = -32) ehci_hcd 0000:00:0c.2: port 4 reset error -110 hub 4-0:1.0: hub_port_status failed (err = -32) hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad? usb 3-2: new full speed USB device using address 2 usb 3-2: USB disconnect, address 2
Markus ------------------------------------------------------- This SF.Net email is sponsored by: GNOME Foundation Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event. GNOME Users and Developers European Conference, 28-30th June in Norway http://2004/guadec.org _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
