On Wednesday 23 June 2004 01:30pm, Pete Zaitcev wrote:
>
> Bill, please also download 2.4.27-rc1 and verify that my backport of
> mct_u232 from 2.6 works for you.
OK -- I've built a test setup with 2.4.27-rc1 and everything seems to be
working as well as usual with my Belkin F5U109 USB/RS-232 adapter.
The changelog entry for 2.4.27-rc1 is rather terse:
USB: Update mct_u232
Is there anything in particular I might have tested besides what I describe
below?
I connected two devices to the Belkin F5U109: an ordinary external RS-232
modem and a Garmin 'GPS35 TracPak' GPS receiver. Both devices were able to
receive and send data just fine. Your patch seemed to be (at least somewhat)
related to the baud setting code, so I successfully exercised both devices at
several baud rates (GPS: 1200, 2400, 4800, and 9600 bps; Modem: all those
plus 300, 19200, 38400 bps). I tried several hot-unplug/re-plugs with the
F5U109 and didn't see any anomalies there either.
Bottom Line: 2.4.27-rc1 looks good from my viewpoint.
Aside: Just for fun (?), since I noticed some changes to the 'pl2303' module,
I also ran some (similar but less extensive) tests with my IOGear GUC232A
USB/RS-232 adapter. Everything appears to be working with that adapter as
well.
Bill Marr
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
