Some more: just rebooted with ACPI=off, loaded all modules, inserted the stick, and
uhci_hcd 0000:00:1f.2: port 2 portsc 0083 hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s uhci_hcd 0000:00:1f.2: wakeup_hc hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 usb 1-2: new full speed USB device using address 2 uhci_hcd 0000:00:1f.2: uhci_result_control: failed with status 440000 [c8bce240] link (08bce1e2) element (08baa040) 0: [c8baa040] link (08baa080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0f34b7a0) 1: [c8baa080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) usb 1-2: new device strings: Mfr=2, Product=3, SerialNumber=4 usb 1-2: default language 0x0409 usb 1-2: Product: Cruzer Mini usb 1-2: Manufacturer: SanDisk Corporation usb 1-2: SerialNumber: 00168368 usb 1-2: hotplug usb 1-2: adding 1-2:1.0 (config #1, interface 0) usb 1-2:1.0: hotplug I guess, those additional messages come not because I rebooted without ACPI, but because on previous boot I inserted and removed modules several times... Just re-checked: re-booted into 2.6.6-bk6 (it wasn't 2.6.5) - it worked. The hang I saw there was not every time there. I had "mount /dev/sda1" hang under 2.4.21 on this PC too. Just compared lsmod and .config's from 2.6.6-bk6 and 2.6.9-rc4 - quite similar. Ok, under 2.6.9 I turned on debugging in USB. 2.6.9 doesn't have CONFIG_SCSI_REPORT_LUNS any more, but I had it on "y" in 2.6.6 anyway. Guennadi --------------------------------- Guennadi Liakhovetski, Ph.D. DSA Daten- und Systemtechnik GmbH Pascalstr. 28 D-52076 Aachen Germany ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
