Hi Alan, > > But the disconnect looked different than without the patch > > - without the device automatically reconnects with a > > different id but it stayed disconnected this time. I don't > > know if that is related to the patch or just luck - but I > > have never seen a disconnect like this before.
[...] > Although I can't tell for sure from this log excerpt, it looks like you > had the drive connected through an external hub and the hub got unplugged > for a moment. Maybe its cable was jiggled. No wonder this appears > different from the times when the drive was disconnected. That's right. I had it connected through a hub at that time. To see if that is working better - as Samuel Colin suggested in http://marc.theaimsgroup.com/?t=110977360700002&r=1&w=2 But I did not touch the cable or the hub, I were out at that time. And the cables are ok. So it looks like the same reset/disconnect bug I experience all the time. Does this give any hint if the bug occurs between controller and hub or between hub and usb-ide chip? Or is that a different layer? Kind regards, Gerd ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel