[EMAIL PROTECTED] wrote:
=> the driver for usb-printer should be "printer" or usblp for more recent kernel.
Hello,
I've try to use the module usbserial for using a POS-Lineprinter from
EPSON.
After I load the driver with
modprobe usbserial vendor=0x4f8 product=0x0202
=> For the ClassID, in some printers, the ID is specify at the endpoint level of the deviceI can send characters to the printer. But I can't configure the printer by ESC sequences, because if i send the ASCII-Value 0x0A (LF), the printer get the ASCII-Value 0x0D (CR). I've test it in the hex dump mode of the printer. What can I do, to send data in raw mode to this printer?
For information:
My linux system doesn't recognize the EPSON POS-Linprinter with USB
interface as printer. I think it is because this printer has a wrong
ClassID; the ClassID I can see on my system is 00.
( "bInterfaceClass" file with the "sysfs" filesystem ). Normaly, it should be 7...
Losts of printers from Epson are recognized, list is disponible here : => http://www.linuxprinting.org/printer_list.cgi?make=Epson
Best regards Olaf Wegner
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
