On Thu, 21 Jun 2007 05:28:07 -0700 Andrew Morton wrote: > > On Sun, 17 Jun 2007 10:57:55 -0700 (PDT) [EMAIL PROTECTED] wrote: > > I haven't had time to bisect this, but I'm having a problem on a AMD64 > > gentoo system where the printer doesn't work with recent kernels. > > > > 2.6.18-rc3 worked > > 2.6.21.1 doesn't > > 2.6.22-rc4 doesn't > > > > unfortunantly the system is gooted on 2.6.18 at the moment and I'm out of > > town so my ability to test is limited I can provide the 2.6.22-rc4 > > (attached) and 2.6.18-rc3 configs. > > > > dmesg appears to show the port being detected, but writes to the port > > under newer kernels appear to complete, but no data gets to the printer. > > > > any suggestions other then doing the large bisect? > > That would be good, thanks. Please be sure to cc linux-usb-devel on > the results.
OK, I'm curious about how someone deduced that this is a problem with a USB printer vs. parallel port printer since the config file has: CONFIG_PRINTER=y CONFIG_USB_PRINTER=y The kernel boot log should probably be posted also. --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
