due to the size the files are posted at http://linux.lang.hm/linux
let me know what else I can send to help. David Lang On Mon, 25 Jun 2007, Randy Dunlap wrote: > Date: Mon, 25 Jun 2007 15:40:28 -0700 > From: Randy Dunlap <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Cc: Andrew Morton <[EMAIL PROTECTED]>, [EMAIL PROTECTED], > linux-usb-devel@lists.sourceforge.net > Subject: Re: long-term regression > > [EMAIL PROTECTED] wrote: >> On Thu, 21 Jun 2007, Randy Dunlap wrote: >> >> > Date: Thu, 21 Jun 2007 08:36:59 -0700 >> > From: Randy Dunlap <[EMAIL PROTECTED]> >> > To: Andrew Morton <[EMAIL PROTECTED]> >> > Cc: [EMAIL PROTECTED], [EMAIL PROTECTED], >> > linux-usb-devel@lists.sourceforge.net >> > Subject: Re: long-term regression >> > >> > On Thu, 21 Jun 2007 05:28:07 -0700 Andrew Morton wrote: >> > >> > > > On Sun, 17 Jun 2007 10:57:55 -0700 (PDT) [EMAIL PROTECTED] wrote: >> > > > I haven't had time to bisect this, but I'm having a problem on a >> > > > AMD64 >> > > > gentoo system where the printer doesn't work with recent kernels. >> > > > >> > > > 2.6.18-rc3 worked >> > > > 2.6.21.1 doesn't >> > > > 2.6.22-rc4 doesn't >> > > > >> > > > unfortunantly the system is gooted on 2.6.18 at the moment and I'm >> > > > out of >> > > > town so my ability to test is limited I can provide the 2.6.22-rc4 >> > > > (attached) and 2.6.18-rc3 configs. >> > > > >> > > > dmesg appears to show the port being detected, but writes to the >> > > > port >> > > > under newer kernels appear to complete, but no data gets to the >> > > > printer. >> > > > >> > > > any suggestions other then doing the large bisect? >> > > >> > > That would be good, thanks. Please be sure to cc linux-usb-devel on >> > > the results. >> > >> > OK, I'm curious about how someone deduced that this is a problem >> > with a USB printer vs. parallel port printer since the config file has: >> > >> > CONFIG_PRINTER=y >> > CONFIG_USB_PRINTER=y >> > >> > The kernel boot log should probably be posted also. >> >> here is the dmesg from 2.6.22-rc4 and kern.log showing 2.6.22.-rc4 and >> 2.6.180rc3 >> >> the printer not working is the parallel port. > > This email didn't show up on lkml or linux-usb-devel due to size limits (it > was 900+ KB). > > David, please send your working 2.6.18 config file. > > Can you post the kernel log files on the web somewhere? > > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
