sorry for the long delay in testing. On Wed, 27 Jun 2007, Randy Dunlap wrote:
> [adding [EMAIL PROTECTED] > > On Wed, 27 Jun 2007 00:38:17 -0700 (PDT) [EMAIL PROTECTED] wrote: > >> On Tue, 26 Jun 2007, Randy Dunlap wrote: >> >>> On Mon, 25 Jun 2007 15:56:17 -0700 (PDT) [EMAIL PROTECTED] wrote: >>> >>>> due to the size the files are posted at http://linux.lang.hm/linux >>>> >>>> let me know what else I can send to help. >>>> >>>> David Lang >>> >>> >>> I suggest that you test 2.6.22-rcN using one or both of these >>> boot options: >>> >>> noisapnp >>> pnpacpi=off >>> >>> Somewhere between 2.6.18 and 2.6.22-development, the ACPI config >>> symbol also starting enabling (selecting) PNP. That's one of many >>> differences.... >> >> with the 2.6.22-rc4 kernel that I was useing earlier, adding these two >> options clears up the problem. Thanks. >> >> should I test the two individually? or just plan on useing both from now >> on? > > Yes, please test them individually. I expect that just one of them > will suffice, but I don't know which one. pnpacpi=off works noisapnp doesn't work >> I normally disable PnP (both ISA and PCI), should I leave it enabled with >> the newer kernels and this motherboard? > > ACPI recently began enabling (selecting) PNP for you... I didn't realize this had changed. > How do you normally disable PCI PNP? > > What kind of hardware is this? Please show us lspci output. 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [e0] HyperTransport: MSI Mapping 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: 66MHz, fast devsel, IRQ 3 I/O ports at fc00 [size=32] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port Capabilities: [80] Power Management version 2 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 3 I/O ports at f000 [size=256] I/O ports at ec00 [size=256] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at e000 [size=16] Capabilities: [44] Power Management version 2 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdf00000-fdffffff 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) Subsystem: Elitegroup Computer Systems Unknown device 1b51 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] I/O ports at dc00 [size=8] Capabilities: [44] Power Management version 2 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdc00000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000fda00000-00000000fda00000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd800000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd700000-fd7fffff Prefetchable memory behind bridge: 00000000fa000000-00000000fbf00000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel 01:06.0 RAID bus controller: 3ware Inc 5xxx/6xxx-series PATA-RAID (rev 12) Subsystem: 3ware Inc 5xxx/6xxx-series PATA-RAID Flags: bus master, stepping, medium devsel, latency 32, IRQ 16 I/O ports at cc00 [size=16] [virtual] Expansion ROM at fdf20000 [disabled] [size=64K] 01:07.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) Subsystem: Adaptec 29160 Ultra160 SCSI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 BIST result: 00 I/O ports at c800 [disabled] [size=256] Memory at fdeff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdf00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 01:08.0 RAID bus controller: 3ware Inc 5xxx/6xxx-series PATA-RAID (rev 12) Subsystem: 3ware Inc 5xxx/6xxx-series PATA-RAID Flags: bus master, stepping, medium devsel, latency 32, IRQ 18 I/O ports at c400 [size=16] [virtual] Expansion ROM at fdf30000 [disabled] [size=64K] 05:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] (prog-if 00 [VGA]) Subsystem: Diamond Multimedia Systems Unknown device 0460 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa000000 (32-bit, prefetchable) [size=32M] I/O ports at 8c00 [size=256] Memory at fd7f0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at fd700000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [100] Advanced Error Reporting 05:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] Subsystem: Diamond Multimedia Systems Unknown device 0461 Flags: fast devsel Memory at fd7e0000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Endpoint IRQ 0 David Lang >>> I would also disable CONFIG_USB_USS720, at least for testing. >> >> for ease of testing (I got time to reboot the box around midnight) I used >> the same config as before, so this is still on. >> >> David Lang >> >>> >>>> On Mon, 25 Jun 2007, Randy Dunlap wrote: >>>> >>>>> Date: Mon, 25 Jun 2007 15:40:28 -0700 >>>>> From: Randy Dunlap <[EMAIL PROTECTED]> >>>>> To: [EMAIL PROTECTED] >>>>> Cc: Andrew Morton <[EMAIL PROTECTED]>, [EMAIL PROTECTED], >>>>> linux-usb-devel@lists.sourceforge.net >>>>> Subject: Re: long-term regression >>>>> >>>>> [EMAIL PROTECTED] wrote: >>>>>> On Thu, 21 Jun 2007, Randy Dunlap wrote: >>>>>> >>>>>>> Date: Thu, 21 Jun 2007 08:36:59 -0700 >>>>>>> From: Randy Dunlap <[EMAIL PROTECTED]> >>>>>>> To: Andrew Morton <[EMAIL PROTECTED]> >>>>>>> Cc: [EMAIL PROTECTED], [EMAIL PROTECTED], >>>>>>> linux-usb-devel@lists.sourceforge.net >>>>>>> Subject: Re: long-term regression >>>>>>> >>>>>>> On Thu, 21 Jun 2007 05:28:07 -0700 Andrew Morton wrote: >>>>>>> >>>>>>>>> On Sun, 17 Jun 2007 10:57:55 -0700 (PDT) [EMAIL PROTECTED] wrote: >>>>>>>>> I haven't had time to bisect this, but I'm having a problem on a >>>>>>>>> AMD64 >>>>>>>>> gentoo system where the printer doesn't work with recent kernels. >>>>>>>>> >>>>>>>>> 2.6.18-rc3 worked >>>>>>>>> 2.6.21.1 doesn't >>>>>>>>> 2.6.22-rc4 doesn't >>>>>>>>> >>>>>>>>> unfortunantly the system is gooted on 2.6.18 at the moment and I'm >>>>>>>>> out of >>>>>>>>> town so my ability to test is limited I can provide the 2.6.22-rc4 >>>>>>>>> (attached) and 2.6.18-rc3 configs. >>>>>>>>> >>>>>>>>> dmesg appears to show the port being detected, but writes to the >>>>>>>>> port >>>>>>>>> under newer kernels appear to complete, but no data gets to the >>>>>>>>> printer. >>>>>>>>> >>>>>>>>> any suggestions other then doing the large bisect? >>>>>>>> >>>>>>>> That would be good, thanks. Please be sure to cc linux-usb-devel on >>>>>>>> the results. >>>>>>> >>>>>>> OK, I'm curious about how someone deduced that this is a problem >>>>>>> with a USB printer vs. parallel port printer since the config file has: >>>>>>> >>>>>>> CONFIG_PRINTER=y >>>>>>> CONFIG_USB_PRINTER=y >>>>>>> >>>>>>> The kernel boot log should probably be posted also. >>>>>> >>>>>> here is the dmesg from 2.6.22-rc4 and kern.log showing 2.6.22.-rc4 and >>>>>> 2.6.180rc3 >>>>>> >>>>>> the printer not working is the parallel port. >>>>> >>>>> This email didn't show up on lkml or linux-usb-devel due to size limits >>>>> (it >>>>> was 900+ KB). >>>>> >>>>> David, please send your working 2.6.18 config file. >>>>> >>>>> Can you post the kernel log files on the web somewhere? > > --- > ~Randy > *** Remember to use Documentation/SubmitChecklist when testing your code *** > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
