Thomas Bader wrote: > > Hi all > > I got a NoName USB hard disk. But I don't have a clue how > to get it working. > > I compiled a kernel (2.4.3) with uhci, usb-storage, scsi_mod and > devfs and it works fine. > > But if I plug in my USB hard disk, nothings happens. I assume, some new > entries under /dev/discs or /dev/usb should be created... > > Here's the output of my kern.log: > > | Apr 13 15:11:14 ricola kernel: uhci.c: wakeup_hc > | Apr 13 15:11:14 ricola kernel: uhci.c: root-hub INT complete: port1: 80 port2: 93 >data: 4 > | Apr 13 15:11:14 ricola kernel: hub.c: USB new device connect on bus1/2, assigned >device number 3 > | Apr 13 15:11:14 ricola kernel: usb.c: USB device 3 (vend/prod 0x5ab/0x200) is not >claimed by any active driver. > > Are there some other drivers to use this disk? Can you please send the contents of /proc/bus/usb/devices and /proc/bus/usb/drivers with this device plugged in? I may be able to figure out a more appropriate response. If you just want to play with the problem, try http://bravin.home.cern.ch/bravin/usbide.html or http://www.netcologne.de/~nc-reisinjo/ for some other drivers that might help. Brad _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: http://lists.sourceforge.net/lists/listinfo/linux-usb-users
