Thomas Bader wrote:
[snip]
> /proc/bus/usb/devices contains:
>
[snip]
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=05ab ProdID=0200 Rev= 1.10
> S: Product=USB to IDE Adapter
5ab is In-System Design, and 200 is one of the ATA bridges
(according to http://www.linux-usb.org/usb.ids)
So you probably don't need either of the two drivers that
I mentioned in a previous email.
I assume that you are using a late 2.4 kernel, although
a quick check of the 2.4.3 kernel didn't look promising
There is some stuff in the CVS for the mass storage project
for isd200, which might be close to what you need. Maybe
contact [EMAIL PROTECTED], which the contact email
listed in the CVS (see
http://cvs.sourceforge.net/cgi-bin/cvsweb.cgi/storage/isd200.c?rev=1.7&content-type=text/x-cvsweb-markup&cvsroot=linux-usb
Sorry I can't help more.
Brad
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
