You'll need to supply more information. Complete kernel logs and various 
outputs of commands, you'll find the requeste information list in the FAQ 
at http://www.linux-usb.org/.

On Sat, 22 Jun 2002, David wrote:

> On Sat, 22 Jun 2002, Stephen J. Gowdy wrote:
> 
> > You probably need to mount /dev/sda1 (a partition) rather than the whole
> > device. Using fdisk should tell you wha tthe partitions are, although it
> > would normally also tell you this in your kernel logs.
> >
> 
> I tried running 'fdisk /dev/sda' and I got the following:
> 
> root@erwin:~# fdisk /dev/sda
> You will not be able to write the partition table.
> 
> Unable to read /dev/sda
> 
> I also tried running mount /dev/sda1 /camera and I got the following:
> 
> mount: block device /dev/sda1 is write-protected, mounting read-only
> mount: /dev/sda1 is not a valid block device
> 
> I am hoping this is what you were referring to when you said kernel logs.
> I got this from /var/log/messages
> 
> Jun 22 21:02:14 erwin kernel: hub.c: USB new device connect on bus1/2,
> assigned device number 6
> Jun 22 21:02:14 erwin kernel: Manufacturer: SCM Microsystems Inc.
> Jun 22 21:02:14 erwin kernel: Product: eUSB SmartMedia Adapter
> 
> That's all I saw concerning my card reader.
> 
> > On Sat, 22 Jun 2002, David wrote:
> >
> > > I am trying to use my ZiO! smart media card reader with Linux.  I am using
> > > kernel 2.4.19-pre10 with Slackware 8.0.  I have all the necessary modules
> > > installed(CONFIG_SCSI (module), CONFIG_BLK_DEV_SD (module),
> > > CONFIG_CHR_DEV_SG (module), CONFIG_USB, CONFIG_USB_STORAGE (module),
> > > CONFIG_USB_STORAGE_DPCM, CONFIG_USB_SDDR09).  When I plug the device, I
> 
> 

-- 
 /------------------------------------+-------------------------\
|Stephen J. Gowdy                     | SLAC, MailStop 34,       |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
|http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
 \------------------------------------+-------------------------/



-------------------------------------------------------
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to